Ok, most doods are concerned with cooling, i'm interested in heat.
In particular adding to passive solar (in my greenhouse.. in winter.. for vegies..)..
So I was considering building an insulated box/es inside the g/house.. say 8' x 2' by 4' tall housing 3 growing totes and pumping water from three more totes under (50 odd gallons) through an bar/heatsink (cobs attached), letting the heat redistribute to the cabinet.
(I guess with an exhaust fan on a thermostat in the cabinet ceiling as well to tick over some fresh air intake)
I have vero 18's & was looking at between 180 and 360w in various cycles, and more than one box like this ^v
Maybe the efficiency of cobs would make this way of gathering heat negligible?
Any thoughts on attaching pvc (gluing) directly to the ends of Al light bars??
In particular adding to passive solar (in my greenhouse.. in winter.. for vegies..)..
So I was considering building an insulated box/es inside the g/house.. say 8' x 2' by 4' tall housing 3 growing totes and pumping water from three more totes under (50 odd gallons) through an bar/heatsink (cobs attached), letting the heat redistribute to the cabinet.
(I guess with an exhaust fan on a thermostat in the cabinet ceiling as well to tick over some fresh air intake)
I have vero 18's & was looking at between 180 and 360w in various cycles, and more than one box like this ^v
Maybe the efficiency of cobs would make this way of gathering heat negligible?
Any thoughts on attaching pvc (gluing) directly to the ends of Al light bars??
Last edited: