NEW TO COCO/PERLITE! could use your help and opinions

This will be my 2nd grow. I was taught by someone that ended up my friend but that man is so busy with all his projects and life that he hasn't even had the time in about 1 year to help me going thru the whole process step by step. But here he goes I'm going to break down how my set up from: ez cloner --> 50's / 4 inch rock wool cubes --> then place the 4 inch cube into a 5 gallon smart pot 2 part coco 1 part perlite. In a 4x4 tent on a tray that drains out 1000 watt and air is blowing everywhere and is getting fresh and exhaust and i will not be running co2. And ac is connected if needed. I just wanted to know will that work the CUBE on top of the coco pot maybe like 2 inches deep in it or one just to get it a snug in there.

but the real reason im here is the feeding part. How often? When to flush? like weekly flushes how often to water? those are the things i need to know. I know about checking run offs and stuff like that. Phing ppms humidity all that good stuff now i need to get the feeding down and then i can move on to learning more stuff theres so much to learn im going nuts so if you guys can help me in any way or give me tips that would be awesome. I hope this thread builds up maybe others can benefit from this post or maybe theres one already. Ok i gota go work now but i see roots on my girls on the ez cloner so im going to have to jump start this sooooon. I have all my foods for them ladies too its just how to feed them ;( im new bare with me thanks for your time have a good one!

bump opinions and help please!!!

ii grow in a similar fashion just a bit bigger and on flood tables. If your growing from clone start feeding right away at about 1/2 strenght then up it to full power over a couple weeks. I'm able to floob mine 2-3 times a day you could probably do once a day.flushing is an option i flush once mid flower and then the final week thats it. good luck hope that gives you enough to get started

do you need to check runn off in coco and if so how do you go about corecting it?

I was planning on hand watering a tray full of medium now. Instead of smart pots. I'm using 4x4 trays and filling it all the way with coco/perlite. instead of 4 ima use 3 inche rockwool now then transfer them into the bed of coco in the 4x4. and one 1000 per 4x4 ima have about 20-26 tables. Should pull about 1.5-2+ per light with the feeding and stuff this guy has taught me. Cause my other grows i got 2 with no AC and no CO2 lol so a noobie grower can do it. I just half assed it and didnt listen to well Thanks for the info mrduke. Ill try to update this into a blog or something or start a new grow but stuffs already been going so and i dont have a camera to take pictures

you check run off in everything. As i was taught. Check p.h. and ppm. If ppm's are to high then add water to rez or flush till it reads what u want. If its to low bump up stuff 1ml + or more per gal or whatever size your mixing in. I hope this helps I aint a pro and i dont know if this is 100% good info im giving u but its what i was taught. Someone correct me if im wrong