Viparspectra ks3000 3x3 grow

Jjgrow420

Jjgrow420

Well-Known Member
Welcome to the grow!. Just getting things going with the @ViparSpectra ks3000 in here so stay tuned for some updates in the comming days.
In the meantime, you can check out the light here;
ViparSpectra KS/XS/PRO Series Lights:
Coupon Code: Jjgrow420
Amazon US: https://amzn.to/3XsTmTC
US: https://www.viparspectra.com
CA: https://www.viparspectraled.ca
AU: https://www.viparspectraled.com.au
EU: https://www.viparspectra.eu
UK: https://www.viparspectra.co.uk

KS3000 Product Key Features:

(1) Top Models of Top Brands Diodes:
Samsung LM301H PPE is 3.10 μmol/J, which is higher than the LM301B. SAMSUNG designs LM301H for Horticulture. KS3000 uses LM301H for Your Harvest.
(2) Even PAR Distribution, Boost Yields to Higher Level:
The PPFD in a 3x3 tent is from 744 to 1000μmol/m²/s, which meet the flowering needs. KS series bring big earns to every grower.
(3) Excellent PPE: 2.38 μmol/J
(4) Larger Size than Other Brands:
The size of the KS3000 is 32"x32", ensure every plant from the corner to the center in 3x3 tent has enough light and get more harvest.
(5) Dimmer Knob: Easy to change your light intensity, from between 0% to 100%.
(6) Detachable Power Supply: To remove heat from your grow space.
(7) Installation: Just 10 minutes to assemble the light.
 
Jjgrow420

Jjgrow420

Well-Known Member
Budzbuddha said:
Interested in that watering setup - looking to dabble in a straight coco run. Might look into a gravity feed.
Been a Soil / peat boy too long. What’s your setup ?
Drippers ?
Rings ?
Click to expand...
I'll take some pics. It's really a super simple dtw setup with a 30$ irrigation kit from Amazon and 2 400gph amazon pumps. The whole setup costs less than 50$. I was trying to learn how to do an automated dtw setup before I plumbed the 5x5, and I had all that on hand anyways so I just made it happen. I just use the sprinkler heads that came with the kit but I've made a few dripper ring prototypes, as well as ordered a bunch of 2gph drippers which I can use as well. Still trying to figure out the best way but what I'm doing is working fine.
 
Jjgrow420

Jjgrow420

Well-Known Member
This is a link to the exact one I bought. (I have like 3 or 4 of these kits I use them for the garden outside too)
Drip Irrigation Kit,100ft 3/8" & 1/4" Mirco Irrigation System,Automatic Garden Watering System for Plant,Sprinkler System Kit,Indoor Outdoor Automatic Watering Misting Supply for Raised Bed Greenhouse https://a.co/d/8pmxKPQ
I prefer this particular kit because it comes with single and double manifolds so you can modify to your needs. The others have 4port or more which I find drops the pressure too much.
It also comes with a few other items the other kits don't.
I run in a loop, with a pump feeding each end of the loop so there's minimal pressure drop through the system. Everyone's getting pretty much the same amount of water. I was able to run 9 plants with 2 lines to each pot. Now I'm just running 6 and the pressure is much higher.
 
Last edited:
Jjgrow420

Jjgrow420

Well-Known Member
ViparSpectra said:
This water system is very handy and helpful. So when you want to water the plants, just turn on the tap and the water goes directly into the soil?
Click to expand...
Yep the water and nutrient mix is held in a reservoir. Pumps are used to bring the water into the tent. Right now since I'm only watering once per day/two days, I just manually run the pumps. Soon once they are a bit more established I'll run a repeat cycle timer and the pump will turn on 2 or 3 times per day cycle depending on the plants needs.
 
You must log in or register to reply here.
Top