bodhi seeds

JDGreen

JDGreen

Well-Known Member
D_Urbmon said:
wow man. wow. I fuckin love trichomes. all about that hash. Could you possibly fit any more resin glands on there? haha

is that skywalker OG x g13/hp or is it one of the other dads? How does it make your eyes feel like they are red as fuck? I absolutely love that feeling.
Click to expand...
Thers a skywalker x snow lotus . Skylotus
But o believe its the 88g13hp.
Id like to see a skywookie.
 
BDOGKush

BDOGKush

Well-Known Member
Bob Zmuda said:
I traded someone awhile ago for them. Never grew the F1's. But my eyes look like cherry tomatoes and they never do when I get high. Red eye jedi indeed. ;)

Hellraizer dropping knowledge. Good stuff.
Click to expand...
Bodhi's Headtrip had the same effect on me, my eyelids felt like lead weights and it made my eyes so blood shot that eye drops didn't have much effect.

I'm going to have to pop more of those soon, it had a thick smooth/creamy smoke with cocoa, berry and hash flavors. Just all around connoisseur quality buds.
 
Last edited:
D_Urbmon

D_Urbmon

Well-Known Member
Just did some reading up on the Pure Kush Suge and dayum. Lots of praise about this one. Same with the Stardawg Guava. Anyone ever smoked either of these in their pure form? Both of these are unheard of where I live(as is everything else cool). I was originally planning on hitting these with C99 pollen but I think I'm going to have to f2 these instead. I think f2 is the closest I'll ever get to the real deal.

Just separating the plants to make sure pollen doesn't mix is a beyatch and working with 3 kinds of pollen doesn't sound fun for my limited space.. I was so paranoid last time I literally emptied a room in the house and wiped down every surface with a wet rag and sprayed myself with water and misted the air as I entered and exited the room after collecting the pollen from each strain. Am I being over paranoid? Them spores go *POOF* and just spread through the air in every direction.


also I let B pick what he would send me instead of giving my choices, both this time and last time. Last time it worked in my favor bigtime as I would have never picked the A35 and I absolutely LOVE IT. I'm starting to feel I might have got some great picks again. But then again I think almost everything would be pretty great.


next run I promise I will do the Dream Beavers and Jabba's Stash. I purchased those 2 so never felt the need to run them immediately.
 
calicat

calicat

Well-Known Member
D_Urbmon said:
Just did some reading up on the Pure Kush Suge and dayum. Lots of praise about this one. Same with the Stardawg Guava. Anyone ever smoked either of these in their pure form? Both of these are unheard of where I live(as is everything else cool). I was originally planning on hitting these with C99 pollen but I think I'm going to have to f2 these instead. I think f2 is the closest I'll ever get to the real deal.

Just separating the plants to make sure pollen doesn't mix is a beyatch and working with 3 kinds of pollen doesn't sound fun for my limited space.. I was so paranoid last time I literally emptied a room in the house and wiped down every surface with a wet rag and sprayed myself with water and misted the air as I entered and exited the room after collecting the pollen from each strain. Am I being over paranoid? Them spores go *POOF* and just spread through the air in every direction.


also I let B pick what he would send me instead of giving my choices, both this time and last time. Last time it worked in my favor bigtime as I would have never picked the A35 and I absolutely LOVE IT. I'm starting to feel I might have got some great picks again. But then again I think almost everything would be pretty great.


next run I promise I will do the Dream Beavers and Jabba's Stash. I purchased those 2 so never felt the need to run them immediately.
Click to expand...
Another item to have handy if you attempt pollen crosses is a spray bottle with 2% hydrogen peroxide. It causes pollen to implode before going rogue and causing accidental pollination. Just be careful with that because it is known as a tissue degrader on a cellular level in humans ( that is why it is not a common item used in hospital settings ) and it can bleach clothing. And no you are not being paranoid. You are just cautious.
 
JDGreen

JDGreen

Well-Known Member
Im haveing this weird thing happen to the leaves on one of my jabbas stash. Mayb yall can help. Ive had it happen before but the one kinda grew out of it but he leaves never healed. Its in sunshine mix 4 with some perlite. Im think ong its time to introduce some feed but it would b alittle earlier than i usually do.

The leaf is kinda canoeing down and if u push the crest it will flip up.

It is only one of six. And mayb another one is doing it on one leaf. So thats why im confused, they have all only had water.
 

Attachments

calicat

calicat

Well-Known Member
From THC farmer JDGreen. I have never used sunshine mix and not sure if it has some sort of time released fertilizer that can possibly cause your clawing. So if your mix does have a time release fert in it might want to transplant in a different medium. That would then contradict the first paragraph of the copy and paste. Its not a good idea to flush hot medium that has known time release fertilizers because all you would be doing is releasing more of it faster than your goal of diluting the medium itself.

Solving Marijuana Plan Leaf Curl/Cupping ProblemsOK rule number #1 when you see this happening is flush with 25% nutrients; use 2 to 3 times the pot size to do this. Flushing means lots of run-off. You use 25% because some elements are not mobile without other elements, so if you have a mag lock up flushing with water won't get the mag out, as it needs nitrogen to be mobile. Your killing your plants with kindness remember they are weeds. Here are more answers for you, you might want to save it for reference later The only time you don't use rule #1 is in the last 2 weeks of flower when bottom leaves stop being used for photosynthesis.
Unless another marijuana grower inspects the damage a true assessment might not be possible. It's hard to tell "exactly" what the culprit is. Unfortunately the “solution” the marijuana grower chooses many times is not the right one.
A misdiagnosis only serves to make matters worse by promoting further decline.
The ultimate and correct solution is in the hands of the marijuana grower.
Here are some common problems when marijuana leaves are curling.
  1. Too much marijuana fertilizer
    The most common cause of marijuana leaf cupping aka leaf margin rolling, leaf margin burn, and leaf tip curl/burn is overzealous use of marijuana plant food. In relationship to factors such as marijuana plant vigour and rate of growth. Leaf burn is often the very first sign of too much marijuana fertilizer.
    A hard, crispy feel to the marijuana leaf frequently occurs as well, as opposed to a soft and cool feel of a happy pot leaf. Back off on the amount and/or frequency of using marijuana fertilizer. Too much marijuana fertilizer can also burn the roots, especially the sensitive root tips, which then creates another set of problems. Note - as soil dries, the concentration of the remaining salts rises further exacerbating the problem.
  2. High Heat
    The marijuana plant is losing water via it’s leaves faster than what can be replaced by the root system. The marijuana leaf responds by leaf margin cupping or rolling up or down (most times up) in order to conserve moisture. A good example is reflected by the appearance of broad-bladed turf grass on a hot summer day, high noon, with low soil moisture levels - the leaf blade will roll upward/inward with the grass taking on a dull, greyish-green appearance. Upon sunrise when moisture levels have returned to normal, the leaf blade will be flat. Lower the heat in the marijuana grow-op and concentrate on developing a large robust root system. An efficient and effective root system will go a long way to prevent heat induced pot leaf desiccation or marijuana leaf margin curling. One short episode of high heat is enough to permanently disable or destroy leaf tissue and cause a general decline in the leaves affected, which often occurs to leaves found at the top of the cannabis plant. The damaged pot leaf (usually) does not fully recover, no matter what you do. Bummer in the summer. One can only look to new growth for indications that the problem has been corrected.
  3. Too much light
    Yes, it’s true, you can give your marijuana plant too much light. Cannabis does not receive full sun from sunrise to sunset in its natural state. It is shaded or given reduced light levels because of adjacent plant material, cloudy conditions, rain, dust, twilight periods in the morning and late afternoon, and light intensity changes caused by a change in the seasons. Too much light mainly serves to bleach out and destroy chlorophyll as opposed to causing marijuana leaf cupping, but it often goes hand-in-hand with high heat for indoor marijuana growers. Turn down the time when the lights on in your marijuana grow room. If you're using a 24 hr cycle, turn it down to 20 hrs. Those on 18 - 6 marijuana growth cycle can turn their lights down two or three hours. Too much light can have many adverse effects on marijuana plants. Concentrate on developing/maintaining an efficient and robust root system.
  4. Over Watering
    For marijuana growers using soil, this practice only serves to weaken the root system by depriving the roots of proper gas exchange. The marijuana plants roots are not getting enough oxygen which creates an anerobic condition inducing root rot and root decline with the end result showing up as leaf stress, stunted growth, and in severe cases, death. Over watering creates a perfect environment for damp-off disease, at, or below the soil line. Many times marijuana growers believe their cannabis plant is not getting enough marijuana fertilizers (which it can't under such adverse conditions), so they add more marijuana fertilizers. Making the problem worst. Not better. Often problem 1 and 4 go together. Too much marijuana fertilizer combined with too much water. Creating plenty of marijuana plant problems.
  5. Not Enough Water
    Not only is the marijuana plant now stressed due to a low supply of adequate moisture, but carbohydrate production has been greatly compromised (screwed up). Step up the watering frequency, and if need be, organic marijuana growers may need to water from the bottom up until moisture levels reach a norm throughout the medium. One of the best methods in determining whether a marijuana plant requires watering is lifting the pots. The pots should be light to lift before a water session. After watering the marijuana plants lift the pots to get an understanding how heavy they've become fully watered. If the pot feels light to the lift - it’s time to water. Don’t wait until the soil pulls away from the side of the pot before watering. And of course, leach, once in a while to get rid of excess salts. These are the five most common problems marijuana growers encounter when growing cannabis. Correcting the problems early will save the marijuana plants, but may reduce overall yield. With practice and experience these problems are easily overcome which will then enable the marijuana grower to produce fantastic marijuana plants. With heavy yields
 
JDGreen

JDGreen

Well-Known Member
calicat said:
From THC farmer JDGreen. I have never used sunshine mix and not sure if it has some sort of time released fertilizer that can possibly cause your clawing. So if your mix does have a time release fert in it might want to transplant in a different medium. That would then contradict the first paragraph of the copy and paste. Its not a good idea to flush hot medium that has known time release fertilizers because all you would be doing is releasing more of it faster than your goal of diluting the medium itself.

Solving Marijuana Plan Leaf Curl/Cupping ProblemsOK rule number #1 when you see this happening is flush with 25% nutrients; use 2 to 3 times the pot size to do this. Flushing means lots of run-off. You use 25% because some elements are not mobile without other elements, so if you have a mag lock up flushing with water won't get the mag out, as it needs nitrogen to be mobile. Your killing your plants with kindness remember they are weeds. Here are more answers for you, you might want to save it for reference later The only time you don't use rule #1 is in the last 2 weeks of flower when bottom leaves stop being used for photosynthesis.
Unless another marijuana grower inspects the damage a true assessment might not be possible. It's hard to tell "exactly" what the culprit is. Unfortunately the “solution” the marijuana grower chooses many times is not the right one.
A misdiagnosis only serves to make matters worse by promoting further decline.
The ultimate and correct solution is in the hands of the marijuana grower.
Here are some common problems when marijuana leaves are curling.



    • Too much marijuana fertilizer
      The most common cause of marijuana leaf cupping aka leaf margin rolling, leaf margin burn, and leaf tip curl/burn is overzealous use of marijuana plant food. In relationship to factors such as marijuana plant vigour and rate of growth. Leaf burn is often the very first sign of too much marijuana fertilizer.
      A hard, crispy feel to the marijuana leaf frequently occurs as well, as opposed to a soft and cool feel of a happy pot leaf. Back off on the amount and/or frequency of using marijuana fertilizer. Too much marijuana fertilizer can also burn the roots, especially the sensitive root tips, which then creates another set of problems. Note - as soil dries, the concentration of the remaining salts rises further exacerbating the problem.
    • High Heat
      The marijuana plant is losing water via it’s leaves faster than what can be replaced by the root system. The marijuana leaf responds by leaf margin cupping or rolling up or down (most times up) in order to conserve moisture. A good example is reflected by the appearance of broad-bladed turf grass on a hot summer day, high noon, with low soil moisture levels - the leaf blade will roll upward/inward with the grass taking on a dull, greyish-green appearance. Upon sunrise when moisture levels have returned to normal, the leaf blade will be flat. Lower the heat in the marijuana grow-op and concentrate on developing a large robust root system. An efficient and effective root system will go a long way to prevent heat induced pot leaf desiccation or marijuana leaf margin curling. One short episode of high heat is enough to permanently disable or destroy leaf tissue and cause a general decline in the leaves affected, which often occurs to leaves found at the top of the cannabis plant. The damaged pot leaf (usually) does not fully recover, no matter what you do. Bummer in the summer. One can only look to new growth for indications that the problem has been corrected.
    • Too much light
      Yes, it’s true, you can give your marijuana plant too much light. Cannabis does not receive full sun from sunrise to sunset in its natural state. It is shaded or given reduced light levels because of adjacent plant material, cloudy conditions, rain, dust, twilight periods in the morning and late afternoon, and light intensity changes caused by a change in the seasons. Too much light mainly serves to bleach out and destroy chlorophyll as opposed to causing marijuana leaf cupping, but it often goes hand-in-hand with high heat for indoor marijuana growers. Turn down the time when the lights on in your marijuana grow room. If you're using a 24 hr cycle, turn it down to 20 hrs. Those on 18 - 6 marijuana growth cycle can turn their lights down two or three hours. Too much light can have many adverse effects on marijuana plants. Concentrate on developing/maintaining an efficient and robust root system.
    • Over Watering
      For marijuana growers using soil, this practice only serves to weaken the root system by depriving the roots of proper gas exchange. The marijuana plants roots are not getting enough oxygen which creates an anerobic condition inducing root rot and root decline with the end result showing up as leaf stress, stunted growth, and in severe cases, death. Over watering creates a perfect environment for damp-off disease, at, or below the soil line. Many times marijuana growers believe their cannabis plant is not getting enough marijuana fertilizers (which it can't under such adverse conditions), so they add more marijuana fertilizers. Making the problem worst. Not better. Often problem 1 and 4 go together. Too much marijuana fertilizer combined with too much water. Creating plenty of marijuana plant problems.
    • Not Enough Water
      Not only is the marijuana plant now stressed due to a low supply of adequate moisture, but carbohydrate production has been greatly compromised (screwed up). Step up the watering frequency, and if need be, organic marijuana growers may need to water from the bottom up until moisture levels reach a norm throughout the medium. One of the best methods in determining whether a marijuana plant requires watering is lifting the pots. The pots should be light to lift before a water session. After watering the marijuana plants lift the pots to get an understanding how heavy they've become fully watered. If the pot feels light to the lift - it’s time to water. Don’t wait until the soil pulls away from the side of the pot before watering. And of course, leach, once in a while to get rid of excess salts. These are the five most common problems marijuana growers encounter when growing cannabis. Correcting the problems early will save the marijuana plants, but may reduce overall yield. With practice and experience these problems are easily overcome which will then enable the marijuana grower to produce fantastic marijuana plants. With heavy yields
Click to expand...
Thanx for the help, i know its not food. ive used thissoil alot and never really had this but once. This is the second. Im guessing heat. It is very dry here so maybe a heat/humidity combo. I let it dry reallygood the last water. Im thinking of giving it alittle food after i knock down the heat.
 
You must log in or register to reply here.
Top