learning electrical/wiring?

Carolina Dream'n

Well-Known Member
So i just bought a dryer (for clothes) only to find that this stupid old house doesn't have a outlet for it. Its a big 3 prong one. I don't know how to go about rewiring a regular outlet for this or if thats how u even go about that but id like to learn and try it myself before i waste money on a electrician. What do?
The easiest fix would be to buy a dryer that uses the same NEMA outlet/plug as your existing dryer outlet. Rewiring consists of tearing down walls, fixing any electric that's not to code once those walls are open (you'd be surprised how often this happens, especially old houses.) inspections on the new work that's done.

I've had 5-6 people ask for the same thing, after laying knowledge on what is would actually take, only 2 of them actually had the rewiring done.

Is your outlet a 4 prong or 3 prong?
4 prong is the newer one that new dryers will use. 3 prong is old school.
 

Carolina Dream'n

Well-Known Member
What upkeep ? I think the manual said to check the wires every 6-9 mths to make sure they secure is that what your referring too?
Nah, I mean the fact that code has changed so much over the years. I worked with a few guys in their 60s a few years ago and they were still following code from the 80s.

So by upkeep I mean staying complaint with the current codes.
 

whitebb2727

Well-Known Member
Where
around here natural gas would be great, much cheaper
where the fuck is natural gas more than electric?
Where I live. My electric bill for Jan was less than $130. Two stories and seven people live here.


Op,
You said there was no outlet. Is there an outlet that doesn't match or is it set up for gas.

If it had a outlet but the dryer cord didn't match you could switch the cord or outlet. Depending on brand and how its mounted, changing the outlet would be just as easy and cheaper.

Also please turn the breaker off. The whole main if you are unsure.

I was at a buddies and he went to do something with the dryer. Not rewiring, I don't remember exactly what. I saw that he didn't turn the breaker off. I told him it would be a good idea. He told me he was a grown man and didn't need any help.

I said OK. Shortly after there was a flash, a popping noise and a grunt or scream.

It ate his ass up. Burnt his hand bad. It even blew some fillings out of his teet . I'm talking about spitting pieces of teeth out.
 

Trousers

Well-Known Member
we have some cheap ass electricity here, $0.04-$0.08 kwh and my gas is always way less
you must have really expensive natural gas
 

whitebb2727

Well-Known Member
The easiest fix would be to buy a dryer that uses the same NEMA outlet/plug as your existing dryer outlet. Rewiring consists of tearing down walls, fixing any electric that's not to code once those walls are open (you'd be surprised how often this happens, especially old houses.) inspections on the new work that's done.

I've had 5-6 people ask for the same thing, after laying knowledge on what is would actually take, only 2 of them actually had the rewiring done.

Is your outlet a 4 prong or 3 prong?
4 prong is the newer one that new dryers will use. 3 prong is old school.
You can put a 4 prong on older 3 prong dryers.
 

rkymtnman

Well-Known Member
i think all you guys are misinterpreting the OP's question.

i think he's asking if he can re-wire a 120 outlet to run his dryer. go back and read his original post.

hence my questioning him about his life insurance policy...
 

whitebb2727

Well-Known Member
i think all you guys are misinterpreting the OP's question.

i think he's asking if he can re-wire a 120 outlet to run his dryer. go back and read his original post.

hence my questioning him about his life insurance policy...
I did to. I reread it. The op says the big three prong one.

So I guess he has a 4 prong dryer and 3 prong outlet.
 

Aeroknow

Well-Known Member
I did to. I reread it. The op says the big three prong one.

So I guess he has a 4 prong dryer and 3 prong outlet.
I'm almost positive the OP is saying that he bought an electric dryer(has the modern 3 prong 240v cord) and realized he doesn't have a god damn 30A 240v outlet needed for an electric dryer.
100% positive he needs a gas dryer. I said it way early on. :hump:
I win:rolleyes:
 

Diabolical666

Well-Known Member
I'm almost positive the OP is saying that he bought an electric dryer(has the modern 3 prong cord) and realized he doesn't have a god damn 30A 240v outlet for an electric dryer.
100% positive he needs a gas dryer. I said it way early on. :hump:
I win:rolleyes:
why cant I pm you duuuude?
 

Singlemalt

Well-Known Member
i think all you guys are misinterpreting the OP's question.

i think he's asking if he can re-wire a 120 outlet to run his dryer. go back and read his original post.

hence my questioning him about his life insurance policy...
He can if he knows what he's doing, but since he asked he doesn't; hence pay for a certified electrician
 
Top