Blaze & Daze

TCH

Well-Known Member
The basics are all done. Now to let it run all night and look at the inkbird in the morning. :)

View attachment 5326355
For the most part, it seems to be working. Sometimes I have witnessed that the fan has a hard time getting started. I'm guessing that a connection may have been faulty. I have just taped the connections so far so it could definitely be that. I have ordered from the free Amazon stuff some 2 pin pigtails that I will be soldering in so I can make the dehumidifier removable for cleaning or maintenance purposes. When it's running though, it definitely seems to be working. I had the inkbird set at 60% and the trigger setting at 69%. Looking at the graph, it fluctuated between 58 and 63 so I'm kinda wondering if that's not just the fridge holding it and the dehumidifier wasn't kicking on at all? Either way, the hard stuff is done and I'll be working out the bugs and getting her all dialed in. Taking the bottom grate into work to cut the corner out for the dehumidifier. Also taking the dehumidifier in to trim the top part of the casing off to clear the 2nd shelf.
Screenshot_20230914_074335_INKBIRD.jpg
 

Laughing Grass

Well-Known Member
Rollitup Advertiser
From "I won't be buying anything for a while ..." to "It's time to swap out my existing tents for some AC Infinity" in less than 7 hours ... is that an RIU record?
Do it!! :D

They do make a nice tent. I could do either a 5 x 10 or I could get a 4 x 4 in the lung room with my 4 x 8 and still have lots of room to access front and rear, or even a 5 x 12, but they are hard to find.
I can't, I'd be over 2k with a new tent, lights and another floor pan.
 

TCH

Well-Known Member
It may perform differently, cycle less, once you have actual moist material in there for it to act on. Curious about that, but just staying in range is good.
Oh definitely. The basic operation is there. But the dehumidifier fan when triggered will just start then stop and start and stop like it doesn't have enough juice to fully fire up. Once running though, it runs great. I tried a different cube and didn't make a difference I don't think. I'll clean up the connections and go from there.
 
Top