Ok I get how to make one, where do you get the 2" net pots? And the top thing to hold the stem in place??? Like thisThis thread has some different ideas .https://www.rollitup.org/grow-room-design-setup/162223-diy-cloner.html
Hell yeah much cheaper to build one.
LOL , those are the neoprene inserts I was just talking about didnt see that post yet .What are these?
in the reply box, look for this iconhow u post utube videos on here?
Went to Hydroshack, talked to the owner for a long time on cloning. I decided to try again before making the cloner. He made it seem like retards can clone. I think my problem was water temp, ph too high, lighting, how I apply the gel, and clip almost all lower growth. He swears by it, he said he just did 120 cuts with 100% success this way, in rockwool. So I'll try again...Hell yeah I'm making one in the morning.. I'll take pics. . think I'll try and make a 12 site. Love building shit
I told you how retarded I did it man. Really, just soak the cubes for 24 hours in 5.5 ph water. Then take em out. Take your cutting. Clip lower leaves. Clip stem again at 45 degree angle near bottom. Dip in gel quickly. Push it in cube. Spray dome/leaves 3-4x daily = success in a week.Went to Hydroshack, talked to the owner for a long time on cloning. I decided to try again before making the cloner. He made it seem like retards can clone. I think my problem was water temp, ph too high, lighting, how I apply the gel, and clip almost all lower growth. He swears by it, he said he just did 120 cuts with 100% success this way, in rockwool. So I'll try again...
Light is way closer, I think this helps.....I told you how retarded I did it man. Really, just soak the cubes for 24 hours in 5.5 ph water. Then take em out. Take your cutting. Clip lower leaves. Clip stem again at 45 degree angle near bottom. Dip in gel quickly. Push it in cube. Spray dome/leaves 3-4x daily = success in a week.
what are you using to prepare your cubes? i make a reall light solution of hormex and overdrive. 1 1/2 oz of hormex per 1 1/2 gallons of water and 2 1/2 oz of the overdrive per 1 1/2 gallons with this mix presoak your cubes and i think you will really enjoy your results.