Pon De Floor
Active Member
It's been a little while since the last experiment, and it's going down to a smaller scale. Quantity is no longer my interest, i seek quality in small controlled areas. I feel that in the right conditions, this can be achieved easily. This is a test run, so i'm just using from seed plants that i bought as singles.
THE BOX:
18"Wx24"Hx24"L (approx)
Inside is lined with mylar and thick white plastic bag, insulated with an inch of styrofoam, then sealed on the outside with a layer of black plastic sheet and cloth.
3x 80mm cpu fans (approx 30 cfm ea.) 1 intake at "ground" level, 2 exhaust just about light line behind light.
there's about 18" between the light and the ground level.
THE BOX:
18"Wx24"Hx24"L (approx)
Inside is lined with mylar and thick white plastic bag, insulated with an inch of styrofoam, then sealed on the outside with a layer of black plastic sheet and cloth.
3x 80mm cpu fans (approx 30 cfm ea.) 1 intake at "ground" level, 2 exhaust just about light line behind light.
there's about 18" between the light and the ground level.