puffnopassing
Active Member
Hello, and today I am going to tell and instruct you guys on how to create the ultimate stealth grow box, its even smaller than the PC grow box. I have grown a male inside this box however I have never grown a female. K so here is goes
Suppplies:
Scissors/knife
50-80mm PC fan1 light socket
13,23 or, 26watt cfl
2 more 13 watt cfls (optional)
white cardboard paper
stapes and a tackplant, soil, ferts ect.
Gallon Milk jug (the square work better than the circular ones)
1. Take a gallon milk jug and poke many holes on the bottom using scissors/knife
ect.
2. Take your fan and outline it with sharpie on one side of the gallon jug. Cut out the outline (Try to cut on the inside of the circle not the outside. If you cut it too big, your fan will just fall out)
3. Cut a 3x3 inch square on another of the sides of your jug. Cut a 4x4 inch square out of white cardboard paper and attatch it to the jug so that the cardboard works as a sort of flap that you can open and close. I used staples and a tack, I remove the tack when I open my flap.
4. Take your light socket and put it through the top opening where you pour out your milk and skrew in no higher than a 26watt cfl light bulb.
5. Insert your fan and fit it inside of the place where you cut out the outline of the fan. Make sure that you insert it so that it sucks air out of the box (poking holes near the top of the box for an intake wont hurt)
6. Put your medium right into the milk jug and plant your germinated seed. Make sure that your fan is always on while the light bulb is on or your grow box will overheat.
7(optional). You can cut no more than 2 more holes at the top of the box to put more light sockets and 13 watt cfls in. Remember more light means faster buds/growth but more light also means less room for your plant. Your guna nead to LST like no other. I wish you much luck
And sorry i dont think the pics are guna work
Suppplies:
Scissors/knife
50-80mm PC fan1 light socket
13,23 or, 26watt cfl
2 more 13 watt cfls (optional)
white cardboard paper
stapes and a tackplant, soil, ferts ect.
Gallon Milk jug (the square work better than the circular ones)
1. Take a gallon milk jug and poke many holes on the bottom using scissors/knife
ect.
2. Take your fan and outline it with sharpie on one side of the gallon jug. Cut out the outline (Try to cut on the inside of the circle not the outside. If you cut it too big, your fan will just fall out)
3. Cut a 3x3 inch square on another of the sides of your jug. Cut a 4x4 inch square out of white cardboard paper and attatch it to the jug so that the cardboard works as a sort of flap that you can open and close. I used staples and a tack, I remove the tack when I open my flap.
4. Take your light socket and put it through the top opening where you pour out your milk and skrew in no higher than a 26watt cfl light bulb.
5. Insert your fan and fit it inside of the place where you cut out the outline of the fan. Make sure that you insert it so that it sucks air out of the box (poking holes near the top of the box for an intake wont hurt)
6. Put your medium right into the milk jug and plant your germinated seed. Make sure that your fan is always on while the light bulb is on or your grow box will overheat.
7(optional). You can cut no more than 2 more holes at the top of the box to put more light sockets and 13 watt cfls in. Remember more light means faster buds/growth but more light also means less room for your plant. Your guna nead to LST like no other. I wish you much luck
And sorry i dont think the pics are guna work
