Taintseasyassed Growshow

taint

Well-Known Member
Here's an easy way Too do iso that I kinda like,hope this helps someone.

Pic one is the stuff.
pic two is laying the piece of 120 silkscreen in the bowl,make sure no plant material slops through into the bowl .
pic three is the plant material dried out and broken down somewhat,just crumbled by hand is all.Not trying to make it into powder as that will get through the screen.
pic four is how much material goes into the jar.
pic five is how much iso I put in the jar.
pic six is the jar dumped into the bowl after shaking vigorously for 45 seconds,I use a watch.
I kinda swoosh the screen around in the iso with the material submerged for a couple secs to let the trichs settle through the screen a bit.Then wad it all up and squeeze the iso out into the bowl,squeeze it like you fucking hate it.I also use the same iso to rinse multiple jars in a run,thicker is better to a certain extent.
pic seven is the bowl going under a fan for a day or so to evap off,never,ever use heat.
See ya in a day or so too scrape out the bowl and have a looksee..........laters.


























My pleasure,here's a link for screens.
Screen printing mesh, silk screen mesh, silk mesh, screen mesh, screen print mesh, mesh for screen printing



Still kinda wet but it's a hella lot easier to scrape up like this than when it's totally dried out.
Don't it look yummy.............................

Seriously ya could smoke it now but I'll wait at least a week or so,I like to let it airdry in a dust free place space.
I'll take a pic of it as it bubbles over time,love the colors on the bubbles.
Attached Thumbnails

 

taint

Well-Known Member
Allrighty using the above described method with a 160 mesh instead of 120,4-20's next month and this runs for my fave holiday.
I used two quarts of 91% iso to process 492 grams of material,still kinda wet so I'll weigh it again in a week or two and see what's really happening regards % of yield.
In a ball and pulled apart to try and show trichs versus plant material.
To my mind hash is all trichs and zero plant material,nearly impossible to actually achieve but one must do ones bestest.
This also is not hard to do a good hint is no fucking acetone or xylene...........:wall:
No coffee filters.
No coffee grinders,they grind way too fine even if used lightly and a fine grind makes for dirty hash.
 

Attachments

taint

Well-Known Member
I average over a lb a month off these two bulbs,quite a bit over a lb on average actually.
 

ifoundnemo

Member
can you teach me how to supercrop?

i tried learning by looking at your pics but i don't know if there is anything specific i'll be missing?
 

taint

Well-Known Member
I just top the plant at say six nodes then after it puts out some growth I'll top the branches on the top four sets of nodes leaving the bottom two for cuts.
So at this point you have 8 stubby branches on the top part of the plant and two longer not topped branches on the bottom.
Then just veg the till the tops are at however big you want to fulfill yer needs in flower.
I'll get some pics tomorrow and try and show exactly what I'm saying.
How long this takes in veg depends on so many variables that it's really hard to say how long it'll take you.
 

taint

Well-Known Member
So here's some pics of how I go about it regards topping for multiple tops and cuts.
I just pinch off the very tip,feels like a small bulb between yer fingers.
Notice in the first pic where one of the fan leaves are removed and the lack of growth on that lateral shoot compared to the others,don't pinch the fan leaves at least until the shoot has few leaves of it's own.
Now just wait till they have the amount of growth for the next step.
 

Attachments

taint

Well-Known Member

So here's how they look for the next step.
On this plant I took the bottom for cuts,6 of them and left the top for the tops.

This is how it looks right before being up-potted and put into flower.
This particular plant should yield 4 oz's be about 24"s tall and a couple feet across when it's all said and done.
 

ifoundnemo

Member
awesome!

now you say up potted, what size pot do you use for a plant a couple feet wide?

I start in red cups, after a week in veg they move to 1 gal, and in flower i move em to 2.5

Lately, i skip the 1 gallon and just go from red cup to 2.5 thinkin more roots= more fruits.
 

taint

Well-Known Member
Cuts go into 1 gal pots until ready for flower then up-potted into 3 or 5 gal pots.
I subscribe to a bigger pot = a bigger plant = more yield.
 

collective gardener

Well-Known Member
These are the same cuts one grown standard one topped,there's some obvious deductions regards pot-size and topping to be made............seems to me.
Like I said earlier,not that hard anyone can do it.
Taint, What strain are those bad ol girls in the middle pics? My chick is looking at those dildo buds and getting all lathered up. Nice work.
 

taint

Well-Known Member
Those are sweettooth3 x g13 x butterscotch hawiians,the buds are kinda penisy looking.
 

collective gardener

Well-Known Member
Those are sweettooth3 x g13 x butterscotch hawiians,the buds are kinda penisy looking.
Well, they just look terrific. What do you mean by "penisy". How is the quality? Did you breed them yourself? They just utilize their canopy space sooooo well. Good show.
 

taint

Well-Known Member
Thanks I mean that they are kinda phallic in shape,those pics don't really show it but I'll get some that do.
I took a st3 f3 female and hit it with some pollen off a g13 x bsh f6 male.
All the plants I grow I've been hacking for multiple gens................I really have a hard time subscribing the werd breeder to it though.
Pollen chucker,hack,.................whatever ya wanna call it.
Personally I call it hitting the best plants I have together,the rewards have been tremendous.
I strongly suggest everyone do it.
 

taint

Well-Known Member
Todays update,the last pics a how much can you get outta a 1 gal pot in dirt contest for another forum...................somebodies gonna owe me a soda.
Going back to organics,stay tuned.
 

Attachments

NorthernLights#5

Active Member
subbed one day Ill be this good. Great looking everything man, just was wondering I read you only grow in soil is it that you have something against DWC or just like soil better?

and i really wanna see the root mass when that 1 gallon is done, bet theres no dirt left just root
 

taint

Well-Known Member
Thank you,the plants do all the werk.
I just tend'em and reap the rewards.
I just like soil better and have nothing against dro in any form..................giggles.
I'll try and get a pic of the roots offa that one for ya,def gonna be one solid mass.
 

taint

Well-Known Member
This has been a damn fine plant and the decision to let her go was a hard one.:sad:
However when faced with limited space and an obviously superior plant outta the same line,one must do what one must.
Her sis is simply all that and a pack of cookies,we'll be seeing her soon........a lot of her.
 

Attachments

Top