Recent content by Squeeky

Same setup, 2in tube leaves out back left to another 5gal. First pick was from left side opening rather than front l.

This was my last grow in RDWC, Solfire Yummy-yummy and Neptune Blue Skunk Funk.

I've ran Jacks previous and was happy but always looking to improve. 4x 5gal bucks and external res. Waterfall aeration no air stones. Took a lot of inspiration from an old youtuber Mechanical Garden. I did weekly changes previously and ran bennies, figured if give sterile a try this round.

If anyone wants to help me cross my Ts and roll my Js, the following are the base and additives for upcoming hydro run. I'm hoping all this works out since I bought in bulk :) Primary Nutrients Jacks 321: Jacks Part A 5-12-26 YaraLive Calcinit 15-0-0 [ dissolves better than Jacks ] Epsom Salt...

Going to test out the max on the 20 bottle :) Set to 55f and letting it sit overnight to equalize then I'll start likely around 75rh and lower 1-2pts ever 24hrs.

Just wanted to drop some photos from my construction, got a branch and tray of larf going for first test. Went with the Elitech controller, I've set the second outlet as temp controller but always on at 20 degree set point. This way I can mount all controls behind the panel once connected to...

There is no benefit when it comes to programming cycles between Inkbird, Elitech, AC controller for our purpose as they all require manually reducing the set RH. However programming a controller to gradually reduce RH from point A to point B over length of time would be ideal and I hope not to...

Are you running a 120mm 12v fan at 9v with the dehumidifier ps or using a another power source?

Just sending another thank you, finished the build tonight and it was MUCH easier than expected. Going to put together tutorial and measurements for Facebook group and I'll try and link here. Basically just 2 days of reading and re-reading the 30+ pages.

Just wanted to take @Hook Daddy for the thread. Starting following last year and with harvest in a week, pulled the trigger. I'll try and update results of build and use.

I've got the attached tent incoming and I'd like some input on air flow as I intend on using for drying and eventually mom/clones. I plan to run a single 4in duct fan outside of the tent with filter. Within the tent an oscillating fan in 2x2, stationary pc fan in top/bottom sectios of the 1x2...