Search results

hi guys, I have a MW CLG-150-12A, is there any 12V cob that I can use with this driver?

I have this box for drivers. The wires are 20AWG (6ft long, from driver to Cob) ARE THEY OK???? The dimmer and his switch also go in the remaining holes in the box. Cheers

Holaaaa!!!! We will update this a bit. I've done the threads, sanding and started wiring the HS. Now I'm waiting for the shipment from kingbrite.

I actually go about 20 € cheaper if I have not to pay taxes. But the next will buy them in Europe

Hello!! Expogrow is in September? Even a long time but the truth is that I still have quite a distance, so is no guarantee that go. I also think two should be fresh, and not wanted to put fans because my tent is very short (3ft). The other day I left over a perfect box of perfect connections to...

Yes. I am a Spanish grower. My TGL's are the originals (specific spectrum). yes, those are my hs. 3 x 800x165x35. at first did not want to use fans (2x cxb3590@1.4A per bar). to see if they are not very hot.. Tomorrow is the last cut, holes, threads and begin sanding. the ideal holders have...

some tutorial to prepare the surface? Grinding, polishing ... worth the instructions of the CPU ones?

Hello!!!! I'm building my own COB LED, and will be posting the whole process. On Friday came the HS, these days custom'm cutting and making holes and threads, hand cut !!!!! hard work!!!!! Electronic parts are waiting to be sent by Jerry. My current lamps are a tgl100 of todogrowled

Really was 16x12.5=200 first time an 25x10=250 second time, whit no cobs, only 3xTgl100 85w ea. first grows in my live

10/15gr. Pot

Yes, 3-4 liters Sog, 16-25 small plants. This monitoring will be smaller (maximum 45cm) and 40 to 50 plants with cabinet lying (90cm height).

First to arr Hello!! sorry about what happened, much encouragement !!! The CXB even the'm doing, my only experience is growing with B & R. I use Biobizz, delta 9 and Bolbastic, and I decide the dose depending on how they are. It is a SOG, 16-25 plants 40 / 50cm in height and to 10cm buds up.

N how do you cut your HS?

Hello everyone !!!! Well I have a few months trying to assemble my own DIY Cob bars and I found this forum valuable information that has helped a lot to choose the option that best suits me. So I decided to go to share with you the construction of the lamp-led and his first crop and so to help...

Hello Supra! For some time I want to do my DIY cob bars, then I discovered RIU and it was easier (except language). I have found here a lot of information to build the best lamp. Each question had its own thread here to solve it, and always with posts by Supra with very detailed information. So...

what about to remove artic? dificult? clean? i will move the cob on the bars in a couple of mounths

think i`ll go for something like this and cut it http://uk.rs-online.com/web/p/products/7943973/

42,5$ each cxb3590? great price, Jerry says me 47,5$, -5$ ea.

Go to page 2. there are the supra options, i check it all the day jjjjjjj i`m going to do similar bars whit 3 x cxb 3590 cd 3500k and a MW hlg-120h-c1400. 150w but best efficiency

but reference to estimates Supra (4) CXB3590 3500K CD 36V @ 1.4A (49W ea) (1) HLG-185H-C1400 196 dissipation W -> 85.7W heat -> passive cooled heatsink 10284cm² -> 5.88" X 38" heatsink (could split in 2 to improve uniformity/spread) It should not be worth? Perimeter = 84cm (3cm 14fins 2...