Search results

At the top of the left pair of strips with two wires + to + and - to - has to be only a single wire + to - The wire from the driver's + output must go in to the bottom + port of the strip that has the + connected at the top. Same deal with the minus side. All respective +'s connected between...

Maybe I'm just lucky :)

Been clearing out my seed stock, so growing a bunch of different stuff from In House and my mate's fanclub seeds from Ethos, and some leftover Bahama Berry and Quikz. Planning on doing a Panama (from Ace) phenohunt over summer to find that illusive non-racy crystal clear euphoric high with no...

I've grown +400 IHG seeds since first discovering them in 2016, so far I've only had one seed throw a non stress related hermie (Masterpiece in week 6). There's always a small group of people hating on the hermie or dud level of every seed brand out there, I hate Dutch Passion's hermie fem...

If you want high quality flower rosin try this: Use trimmed flower and remove stems Don't add moisture with humidipacks etc. to the flower before squishing, if anything dry it out more 37μ bag (25μ works as well) 3.5g in a 2" bag for 3x6 plates, just well stuffed and fold in the opening, no...

No, 3000K is a broad spectrum, I mean mono diodes like 660nm. I have 4x4 with 3000K only, and it's awesome :)

Sounds like it's not correctly wired or there's a loose connection. Can you share a picture if how it's wired?

I'm not a hydro grower but one of my friends had this problem way back in the day, and figured out he had to get the pH down to 4 to hit pH 6 after 24 hours

AC plugs can just be bought in any hardware store. Potentiometer must be 100K Ohm ( I usually use these for manual dimming https://rapidled.com/products/cased-potentiometer-with-knob - You can get them cheaper from Amazon/Alibaba etch. just do a google picture search. Thermal tape look fine...

Which driver is it? If it's a Constant Current driver (serial wiring) it's possible to match many different strips to it. However, if it's a Constant Voltage driver (parallel wiring), you'll have to find 36V strips, I don't think Samsung makes any of those but I bought some from Cutter...

Yes, more light equals more/better bud but with a bit of training and topping you can get a level canopy, and then have the lights close to the plants.

Yes, the power is split evenly between the 4 boards Don't worry about safety issues, Mean Well's got your back with several built-in safety features, and if you wired it wrong one or more boards simply just wouldn't turn on, so it's pretty foolproof :)

The strips are 560x18mm. You can basically group the strips how you want but but keep light distribution in mind, if you space the strips evenly the light is weighted towards the center of the light. I suggest an uneven distribution. I've shown the idea in the drawing below, obviously the...

Are you going to repurpose your drivers? The Q-series suggested be @MedicinalMyA$$ is a really good deal, less than half the usual price. Another good choice is the newer Samsung H-inFlux series where you can get a lot more diodes per strip and minimize how many heatsinks you need. I...

Canopy: 25-28 Root zone +18 Most of us measure at a single point in our rooms/tents which is hardly a scientific approach but a good indicator, and temps can easily differ 5 degrees C from canopy to root zone. When switching from HPS to LED you also change the way your lights put out heat. HPS...

It’s impossible not to, unless you grow with mono color and that’s gonna be a sad grow :)

Squishing your own is quite delightful :) That sucks, bag appeal and story-telling are overrated, Hopefully you'll help open peoples' eyes to proper quality :weed:

The Q-series have 40 diodes per strip vs 88 diodes on the H-inFlux strips, so just use 120% more strips and you're good. You can get away with a lesser heatsink for the Q-series. You'll get a better spread but beacause they're a less than half the power of the H-inFlux I suggest having the...

Thanks, I'm already digging the relaxed atmosphere :)

I squish flower and dry sift. Flower in 37m bags bagsand dry sift in 25m bags. I press at 158 degrees and max out at 1200PSI for 2-3 minutes. This is the first squish which is what I vape, then I also do a second squish (or intend to, I have 4 year old chips waiting to be squished the second...