Search results

sorry for the hijack but it works for you? im having stem rot and the only way to control it is with pool shock or changing res every 3-4days. i guess i will get some thanks

I use 5 cxb3590 5000k @ 10 watts total on top of my aerocloner and works good for me. Before my leds i used to put one 26 watt 5000k cfl on top of my cloner. Good luck

This are the ones I’m talking about

That’s what I thought but no smelly reservoir plus I’m using pondzyme as well. My res temps are between 70 -73 degrees and I have been monitoring that 24/7. it just my tap water 225ppm. I adjusted my pH last Thursday to 5.8 with 820 ppm @ .70 and that was the last time I touch my reservoir thank...

25 cxb3590 and 5 HLG-240h-c1400b dimmed at 175 watts per panel for 875 watts. That bicycle lift makes lights adjustment easier in my tight 5x5 room Happy growing

Hi old thread but recently I started using tap water for my flowering reservoir (cutting corners in my case lol) and pH was a big problem. within a couple of hours swinging from 5.8 to 6.8. I started adding pH down daily to control it but ppm skyrocket to 1000 due to ph down increasing it...

here is how im going to make my own neoprene inserts using sams rubber floor mats and 2 1/8" hole saw for 2" net pot inserts.

Thanks for the advice. I’m running now 90 second on and 10 minutes off, tap water only. I will try that on my next batch, thanks. Happy growing

Hi everyone especially Old stinkbuddies and the new generation in aero nft. about 5 years ago I was struggling with water leaks in my DIY aerocloner. Everytime I was going out it was a very extressful moment thinking all the time in my cloner leaking all the water out. I already tried Rubbermaid...

Here is more proof in reverse drilling Neoprene inserts but the pilot bit is to thick. Green and yellow normal drilling Red in reverse drilling

Hi I bought some homemade 2” neoprene collar like 6 years ago and I been trying to make my own. did you drill them with the drill in reverse? I tried it the other date and it came out nice. To make neoprene inserts for a 2” net pot you need a 2 1/8” hole saw with a small pilot bit. The ones...

Well I have my room doing what you want but viceversa. I’m bringing warm air from inside the house with a passive air intake with a damper to lower humidity when lights are off and dumping that air outside with a exhaust fan with a damper. My room is air tight for a sealed room. I control my...

Is not that. There was some drama in stinkbuddies.com in 2010 and unfortunately lots good info are gone.

That 633gph pump at 15 minutes on is probably warming up your cloner water. I always use a 396gph pump at 2 minutes on with 10 minutes off. Also the more water in your cloner the easier to keep it cooler and look at other things in your grow room that can impact your water temperature. Good...

I got my TSR 10AA Relay in the mail today. These things are completely silent, that’s freaking awesome. Here are the few models out there for others looking for the same device like me. Hoymk SSR3-A4810HK 10A Hoymk SSR3-A4825HK 25A Hoymk SSR3-A4840HK 40A TSR-10AA 10Amps TSR-25AA 25Amps...

On the meanwell driver to your 110v cord Brown= Hot (black) Blue= neutral (white) Green= ground (light blue is ground in your case)

Thanks but no I was testing that contactor before I put it in one of those grey plastic box and wire everything with the trigger wire but unfortunately is loud as hell for my stealth room. Thanks and happy growing

Yes. I know that freaking pop is loud as hell. My grow room is in my garage and I have a chest freezer for beer and meat. I do a lot of bbq and I’m pretty sure one of these days one of my friends will notice that pop. everything is silent except that contactor. Now I’m building a box...

I think this is the one that you are talking about. Thanks again Hoymk SSR3-A4825HK 25A AC-AC SSR3 A4825HK 3 Phase Solid State Relay

Thanks. I got a very good idea using these ssr relays. Thanks again