Search results

Okay I re-wired and holy shit these lights are amazing, I have every strip working now, thinking of adding a red spectrum strip for flower, can I just add the to the same series or since it'll have different ratings/outputs I must wire separate?

I will borrow a multimeter from work and try this, I will also recheck my wiring, take everything apart and re do it, newbie at this all so it's probably me making a mistake somewhere

On the slim line 1ft BXEB-L0340U-xxx0750-C-C3 Forward voltage is shown as 10.9v on the datasheet The 2ft indeed have ~20fv, but I can see on the data sheet it says 10.9v for the 1foot strips? I'm so confused because I'm clearly reading the data sheet for the strips wrong but I don't understand...

https://www.digikey.co.uk/product-detail/en/bridgelux/BXEB-L0340U-30E0750-C-C3/976-BXEB-L0340U-30E0750-C-C3-ND/10279849 Those are the ones I purchased^ BXEB-L0340U-30E0750-C-C3 At 700ma, they're rated 10.9v? Or have I got that wrong?

Ah okay, It's the 1 foot strips, here's a quote of the advice I took from earlier in the forum, as I really wasn't sure about which driver I would need: "I'd wire those strips in series and drive them with an HLG-60H-C700A. This saves a few bucks by not needing to buy the Wago Lever-Lock...

Hey guys, so I finished building my 7 strips Eb3 wired in series with HLG-60H-C700A, but my lights flash on and off, consistently 1 flash per second, even when I turn the dimmer screw up to max they maintain the constant flash, I removed one of the strips, from 7 to 6, and the same thing...

I will take this advice and go with your recommendation, thank you so much for your help, honestly appreciate it so much, I definitely had misunderstandings with regards to voltage, didn't realise voltage could be split between the strips. I will connect in series, seems a lot simpler too, Do...

Ah, I just worked it out with my dimensions and it's 1.6ft2 (micro grow), put meters by accident

Hi guys, very confused here so if anyone can help it would be much appreciated, I'm wanting a driver for 1ft EB3 strips (slim) I only really need a small max amount of light coverage (1.6m2) so 7 strips running @700ma would give me 53.2 watts, this is probably the max I'd run them as @ 35w per...