p0opstlnksal0t
Well-Known Member
Im looking at bringing another 2x 10x10 (7' ceiling height) tents online.... my hope was to run 1kw of lighting per 4x4 footprint inside the tents... should I be looking at cooled single end HPS? A few years ago I was able to pull about 700 grams average per 4x4 area under 1kw SE air cooled light. Would I be able to get this using 270w LED light rails, Two 270w led light rails per 4x4 area?
There's a guy up here in New England selling homemade led's for 260.00 per rail:
There's a guy up here in New England selling homemade led's for 260.00 per rail:
38" x 4". 5.5lbs
Gen3 3000K chips from Luminus. All Meanwell drivers. Active cooled, aluminum rails with 4 chips on each. 288watts. (272w (68w per led x 4)+ 16w for fans).
All intel fans
Data: Chip profiles @ digikey: https://www.digikey.com/product-detail/en/luminus-devices-inc/CXM-22-30-80-54-AC30-F4-3/CXM-22-30-80-54-AC30-F4-3-ND/6151616