epixbud
Well-Known Member
Good day there all fellow greenthumbs!
I been outa the scene for a few years now,
And again hate byin exspensive crap that don't do the trick so am going to start again,
With nothing but a spot to do it!
This go around it'll be an attic in a shop, 20' x 15' x 5'6" high.
It's got the big ass 11" roof rafters so i'll mount the lights and fans between them.
It'll be Aeroponics again.
4 tables flowering
50+ site cloner
Mother room with 6 or 8 mom's, 3 or 4 strains, 2 plants per strain.
Gonna use T'5s for mom's and clones again, 18 hour on cycle.
4 x 600w digitals with 6" light tubes fully vented for closeness,
Gonna use a FlipBox so I only need 2 ballests for 4 lights, 2 on 2 off
Of course white/black poly and mylar sealed rooms
The cloner will be made outa a Tupperware container again no doubt,
1 1/2" neoprene pucks, a pump, 1/2" tubing, sprayers and a recycle timer 30 seconds on 30 off,
Use nothing in it but water PH'd proper and it never fail's!
I've had 98% to 100% success every time that way!
My clones stay in the cloner for 2 weeks then straight into Flower room at 12 hours light, to reduce space, Almost sea of green style, but i still get 3+ foot plants.
My Flower tables are gonna be custom made for the space I got,
I can sink the main reservoirs into the floor between 5" rafters and run my drain system there too,
Tables will be poly 3' x 4' x 10" deep,
Twin wall poly white board for the top with 3 1/2" neoprene pucks, thinkin 50 sites per table
Tubing and sprayers attached under the top so roots can't get them, works awesome!
Tubing run to pump on a recycle timer 30 seconds on 60 off in the Reservoir with a gravity drain back
2 x 6" can fans min 400 cfm, 1 for cooling lights and 1 with carbon filter for venting rooms
That's the list I gotta fulfill
Here's some pics of my last show..........
I been outa the scene for a few years now,
And again hate byin exspensive crap that don't do the trick so am going to start again,
With nothing but a spot to do it!
This go around it'll be an attic in a shop, 20' x 15' x 5'6" high.
It's got the big ass 11" roof rafters so i'll mount the lights and fans between them.
It'll be Aeroponics again.
4 tables flowering
50+ site cloner
Mother room with 6 or 8 mom's, 3 or 4 strains, 2 plants per strain.
Gonna use T'5s for mom's and clones again, 18 hour on cycle.
4 x 600w digitals with 6" light tubes fully vented for closeness,
Gonna use a FlipBox so I only need 2 ballests for 4 lights, 2 on 2 off
Of course white/black poly and mylar sealed rooms
The cloner will be made outa a Tupperware container again no doubt,
1 1/2" neoprene pucks, a pump, 1/2" tubing, sprayers and a recycle timer 30 seconds on 30 off,
Use nothing in it but water PH'd proper and it never fail's!
I've had 98% to 100% success every time that way!
My clones stay in the cloner for 2 weeks then straight into Flower room at 12 hours light, to reduce space, Almost sea of green style, but i still get 3+ foot plants.
My Flower tables are gonna be custom made for the space I got,
I can sink the main reservoirs into the floor between 5" rafters and run my drain system there too,
Tables will be poly 3' x 4' x 10" deep,
Twin wall poly white board for the top with 3 1/2" neoprene pucks, thinkin 50 sites per table
Tubing and sprayers attached under the top so roots can't get them, works awesome!
Tubing run to pump on a recycle timer 30 seconds on 60 off in the Reservoir with a gravity drain back
2 x 6" can fans min 400 cfm, 1 for cooling lights and 1 with carbon filter for venting rooms
That's the list I gotta fulfill
Here's some pics of my last show..........