MrBoard
Well-Known Member
We recently took down a small ATF plant, which we had probably left up drying for a bit too long... the buds were really larfy and we only got about 2 ounces of trim out of it... it smelled great, but was completely covered in dirt.
I was initially considering trying a warm water pre-rinse in order to get some of the dirt off... but decided against it after watching my associate, bottlekap, try doing a pre-rinse on some other dirty trim with little effect...
Anyways... getting to the point... even though I felt kinda silly doing it... I spun the whopping 2 ounces of trim... the output was tiny, as expected... it was extremely sticky right from the get go... it didn't even really wanna come off the screen on my bags... and after going through the pressing screen, it was extremely hard to break apart for drying... normally I just use a card to chop it up... but this time I had to literally rip it apart by hand...
Here are some shots:
1st 100 micron pull... still on the drying plate
2nd 100 micron pull... still on the drying plate
1st & 2nd 120 micron pulls combined... still on the drying plate
1st 100 micron pull... I tried to press it with wax paper... but it was too sticky... it was damn near impossible to get it off after doing this... and I was picking out tiny pieces of wax paper with tweezers afterwards...
2nd 100 micron pull... stuck to my finger after pressing & one more of it sitting back on the plate afterwards... it was still kinda hard getting this one off the wax paper... but definitely nowhere nearly as difficult as the 1st pull...
OK, so thats what I've got for now... I stuck the 1st and 2nd 100 pulls in a jar and will put up some more pictures after it's cured... and prob a video of someone smoking a tester bowl... Also... just because I only put up pictures of the 1st+2nd 100+120 micron... doesn't mean the rest of it was garbage... I pulled quality product from the following screens (in order from best to worst):
1st 100
2nd 100
1st+2nd 120
3rd+4th 100
Pulls 1-4 combined on my second 100 screen (I was using 2 hundred screens, one after another)
3rd+4th 120
1st 73
2nd 73
3+4 73
There was also lower end smoking quality hash in my 45 and 160 micron bags... prob around a 3 star, going by the oakland star rating system... call me a snob... but I personally don't really wanna smoke it
I only pulled food quality hash out of my 190 and 25 screens
I was also planning on checking it out under a scope for dirt particles... but I kinda doubt there are any... and again... this is WITHOUT doing a warm water pre-rinse...
I was initially considering trying a warm water pre-rinse in order to get some of the dirt off... but decided against it after watching my associate, bottlekap, try doing a pre-rinse on some other dirty trim with little effect...
Anyways... getting to the point... even though I felt kinda silly doing it... I spun the whopping 2 ounces of trim... the output was tiny, as expected... it was extremely sticky right from the get go... it didn't even really wanna come off the screen on my bags... and after going through the pressing screen, it was extremely hard to break apart for drying... normally I just use a card to chop it up... but this time I had to literally rip it apart by hand...
Here are some shots:
1st 100 micron pull... still on the drying plate 2nd 100 micron pull... still on the drying plate 1st & 2nd 120 micron pulls combined... still on the drying plate 1st 100 micron pull... I tried to press it with wax paper... but it was too sticky... it was damn near impossible to get it off after doing this... and I was picking out tiny pieces of wax paper with tweezers afterwards... 2nd 100 micron pull... stuck to my finger after pressing & one more of it sitting back on the plate afterwards... it was still kinda hard getting this one off the wax paper... but definitely nowhere nearly as difficult as the 1st pull...OK, so thats what I've got for now... I stuck the 1st and 2nd 100 pulls in a jar and will put up some more pictures after it's cured... and prob a video of someone smoking a tester bowl... Also... just because I only put up pictures of the 1st+2nd 100+120 micron... doesn't mean the rest of it was garbage... I pulled quality product from the following screens (in order from best to worst):
1st 100
2nd 100
1st+2nd 120
3rd+4th 100
Pulls 1-4 combined on my second 100 screen (I was using 2 hundred screens, one after another)
3rd+4th 120
1st 73
2nd 73
3+4 73
There was also lower end smoking quality hash in my 45 and 160 micron bags... prob around a 3 star, going by the oakland star rating system... call me a snob... but I personally don't really wanna smoke it
I only pulled food quality hash out of my 190 and 25 screens
I was also planning on checking it out under a scope for dirt particles... but I kinda doubt there are any... and again... this is WITHOUT doing a warm water pre-rinse...
