Boxes or Some Type of Enclosure for DIY lights?

chipper68

chipper68

Member
As it seems many of us have used recycled metal boxes and other *stuff* for these DIY/COB lights, and I just read a moment ago about using a no-longer-wanted LED panel to fit with COBs etc..

Leads me to wonder, are there places that you can order pre-made boxes with switches/cords etc?

I can bend AL and make something if I wanted to... IMO, it's a lot of work.

Any ideas/sources??
 
chipper68

chipper68

Member
dbkick said:
Why not an old cheap air cooled hood? It's being done.
Click to expand...
Not a bad idea, I can see that!

I suppose I had envisioned a pre-made box or choice of such, and if it was wired with some switches etc.. a bonus! They sell these LED panels on ebay/amazon for peanuts, there must be a source?
 
dbkick

dbkick

Well-Known Member
Remove the glass, drop in a sheet of aluminum with holes cut in it and there you go, plenty of room to mount drivers and wtfever else you want and totally air cooled.
 
dbkick

dbkick

Well-Known Member
I think the first place I saw that type of panel (in an air cooled hood) at solis tek hiled (which never did reach production as far as I know).
 
Positivity

Positivity

Well-Known Member
bggrass said:
Once you enclosed it, passive cooling might not be a good idea. What do you guys think?
Click to expand...
The lid comes separate off of amazon. You could get a perforated sheet instead, cut it with metal shears, and screw it in. Holes may not line up, might have to make new holes.

or just leave the lid off..

So easy to add a fan when using a box its hard not to
 
torontoke

torontoke

Well-Known Member
A metal first aid kit box would probably work well.
Old skinny narrow toolboxes would look cool too
 
FranJan

FranJan

Well-Known Member
God forbid one of you little %$**&s types in "vented enclosure" into Google :roll:. j/k LOL Here's a company that does custom cutouts.
http://www.factorymation.com/Products/Enclosures/
http://factorymation.info/catalog/fmcat_saginaw.pdf

Actually there was a real cool octagon cases at Mouser at one time. Oh yeah, the Internet! Duh.
http://www.mouser.com/Search/Refine.aspx?Keyword=octagon+enclosure


Could of sworn they had bigger ones :). Anyway maybe you should also check out the company that makes them,
http://www.hammondmfg.com/
 
mc130p

mc130p

Well-Known Member
dionysus4 said:
all ur doing is paying to have worse cooling

just wire properly and use tip ties
Click to expand...
possibly...but they look nice and all the wires are contained, with connections protected. Pull on the power cord and it comes unplugged from the box, instead of ripping off part of a holder or a soldered connection.
 
You must log in or register to reply here.
Top