carrisurf
Member
Hi everyone!
long time smoker, first time grower. This forum has been such a huge help that i thought I'd post my grow. It's a really great community on here and I'm glad to be a part of it now! Big thanks to roseman and the bubbleheads, a lot of what i have going wouldn't be possible without them.
I've tried to keep the budget down on this set-up, for a couple reasons- firstly being... I'm poor. But really the challenge of seeing how little i can spend to get it done is the true DIY spirit!
All in seeds planted it's cost me about $300 (can). So if i can yeild 2 oz. outta this unit, I'm in the green!
The specs
grow cab-16" x 28" x 39"
Fans- (2) 105 cfm computer fans
light- (3) 42w 6500k CFL w/ reflectors
DWC- rubbermaid tote, 3 1/2" net pots, 60 gal air pump (dual outlet), (2) 12" airstones.
I'll be growing BC Big Bud from BC seed king. That seed bank is great! they ship fast, send more than you pay for and are cheap! $55 (can) for 17 big bud seeds. Any complaints you hear about them are from international buyers, and that's the mail! not the seed bank!
really i kinda regret just getting the one strain, but i'll grow a different one next round. Suggestions appreciated on a new strain (BC seed king only, I'm loyal).
So thanks a lot for checking out my thread! here's the rig!
I bought this beat up old dresser off craigslist for $15. it's perfect! I spent the first day ripping it apart then screwing the drawer fronts back on. I built a floor from some scrap plywood i had, pulled off the cardboard back and reattached it with hinges and voila! a perfect grow box.
I got some Poly off a friend and stapled it to my box, then sealed it with white duct tape.
next up were the fans, I cut 2 holes in the door. Intake at the bottom right, exhaust at the top left.
So here's the back side all finished!
As for lighting, I'm gonna try 3 42w CFL's my first time around for veg, but when I get to flower expect to see a small HPS, 250 or 400. Any suggestions? Home depot only had 2 reflectors, so there's only 2 in the picture, but there'll be one more in there once they restock. I do feel like this'll be inderlit, but you'll see soon enough!
Here's the system!!
well after pluggin it all in it works like a charm, but the fans were pretty loud, so i bought a plug in light dimmer and just turned them down, there's only like 20 cubic feet in the cab, so 105 cfm is more than i need, now it's just a quiet hum, perfect! also pictured is my min/max temp& humidity sensor.
Yesterday i started germinating some of my seeds. I figured I'd start with 7 just in case one didn't pop, and we've all read horror stories about people who didn't have any crack. I did 4 in the wet paper towel, and 3 I just put in a cup of water. 24 hours later, 7 sprouts brother!! bc seed king! woohoo! I soaked my rockwool to lower the ph, and just planted them this morning. so now it's the waiting game.
I know it's all subjet to change, but the plan is I'm gonna veg until i can take a cutting off each plant, then flower the cuttings right away in a different place to determin sex. I'll take another cutting off the biggest healthiest lady to be my mother for future cycles. Any of the first 6 that are ladies will become my first crop! anything that grows a dick gets the axe right away. I think I'll be scroging because of my obvious height issue. Maybe not this grow if i can't tell the sex in time, but certainly on the next once I'm using cuttings.
One thing i want to address is the bubbleponics set up, initially i was gonna use the pump/feeder tubes, but i couldn't find a pump that was suitable, seriously. went to all the pet stores, building stores, garden stores in town and nothing was right (or under $100). So I'll be hand watering until the roots hit the deep stuff. But I'm not sure i fully see the advantage even though I've read countless posts saying it really does work. I mean really, all your doing is dripping reservoir water onto the cube right? it's not like that air is under enough pressure to push into the cube, or that you'd even want that (pressurised air-seedling). but results speak for themselves right? I still plan on getting on the bubbleponics bandwagon next grow (I'll have to order my pump online). And other question, why a gap under the net pot to the reservoir? don't you get a growth boom once they hit the bubbly water? why make the roots travell an inch in nothing to hit the good stuff? I set my water level to about 1/8 of an inch INTO the net pot, then filled that 1/8" with hydroton, then put mu cube on that. so as soon as my roots leave the cube, BAM! the good stuff.
I guess that's it for now, thanks again to all the bubbleheads and forum members for their great posts and helpful advice.
3 ounces by christmas!
long time smoker, first time grower. This forum has been such a huge help that i thought I'd post my grow. It's a really great community on here and I'm glad to be a part of it now! Big thanks to roseman and the bubbleheads, a lot of what i have going wouldn't be possible without them.
I've tried to keep the budget down on this set-up, for a couple reasons- firstly being... I'm poor. But really the challenge of seeing how little i can spend to get it done is the true DIY spirit!
All in seeds planted it's cost me about $300 (can). So if i can yeild 2 oz. outta this unit, I'm in the green!
The specs
grow cab-16" x 28" x 39"
Fans- (2) 105 cfm computer fans
light- (3) 42w 6500k CFL w/ reflectors
DWC- rubbermaid tote, 3 1/2" net pots, 60 gal air pump (dual outlet), (2) 12" airstones.
I'll be growing BC Big Bud from BC seed king. That seed bank is great! they ship fast, send more than you pay for and are cheap! $55 (can) for 17 big bud seeds. Any complaints you hear about them are from international buyers, and that's the mail! not the seed bank!
really i kinda regret just getting the one strain, but i'll grow a different one next round. Suggestions appreciated on a new strain (BC seed king only, I'm loyal).
So thanks a lot for checking out my thread! here's the rig!
I bought this beat up old dresser off craigslist for $15. it's perfect! I spent the first day ripping it apart then screwing the drawer fronts back on. I built a floor from some scrap plywood i had, pulled off the cardboard back and reattached it with hinges and voila! a perfect grow box.
I got some Poly off a friend and stapled it to my box, then sealed it with white duct tape.
next up were the fans, I cut 2 holes in the door. Intake at the bottom right, exhaust at the top left.
So here's the back side all finished!
As for lighting, I'm gonna try 3 42w CFL's my first time around for veg, but when I get to flower expect to see a small HPS, 250 or 400. Any suggestions? Home depot only had 2 reflectors, so there's only 2 in the picture, but there'll be one more in there once they restock. I do feel like this'll be inderlit, but you'll see soon enough!
Here's the system!!
well after pluggin it all in it works like a charm, but the fans were pretty loud, so i bought a plug in light dimmer and just turned them down, there's only like 20 cubic feet in the cab, so 105 cfm is more than i need, now it's just a quiet hum, perfect! also pictured is my min/max temp& humidity sensor.
Yesterday i started germinating some of my seeds. I figured I'd start with 7 just in case one didn't pop, and we've all read horror stories about people who didn't have any crack. I did 4 in the wet paper towel, and 3 I just put in a cup of water. 24 hours later, 7 sprouts brother!! bc seed king! woohoo! I soaked my rockwool to lower the ph, and just planted them this morning. so now it's the waiting game.
I know it's all subjet to change, but the plan is I'm gonna veg until i can take a cutting off each plant, then flower the cuttings right away in a different place to determin sex. I'll take another cutting off the biggest healthiest lady to be my mother for future cycles. Any of the first 6 that are ladies will become my first crop! anything that grows a dick gets the axe right away. I think I'll be scroging because of my obvious height issue. Maybe not this grow if i can't tell the sex in time, but certainly on the next once I'm using cuttings.
One thing i want to address is the bubbleponics set up, initially i was gonna use the pump/feeder tubes, but i couldn't find a pump that was suitable, seriously. went to all the pet stores, building stores, garden stores in town and nothing was right (or under $100). So I'll be hand watering until the roots hit the deep stuff. But I'm not sure i fully see the advantage even though I've read countless posts saying it really does work. I mean really, all your doing is dripping reservoir water onto the cube right? it's not like that air is under enough pressure to push into the cube, or that you'd even want that (pressurised air-seedling). but results speak for themselves right? I still plan on getting on the bubbleponics bandwagon next grow (I'll have to order my pump online). And other question, why a gap under the net pot to the reservoir? don't you get a growth boom once they hit the bubbly water? why make the roots travell an inch in nothing to hit the good stuff? I set my water level to about 1/8 of an inch INTO the net pot, then filled that 1/8" with hydroton, then put mu cube on that. so as soon as my roots leave the cube, BAM! the good stuff.
I guess that's it for now, thanks again to all the bubbleheads and forum members for their great posts and helpful advice.
3 ounces by christmas!