Cutters Grow kit

T

travis11952

Member
Hey wanted to know what people thought of this deal i found. Cant post the link but this is what it includes. It is a DIY, but they just pre packaged all the materials for you.


24 pcs Cree CXB3590, top bins only

24 pcs Ideal 50-2303CR CXB Holder

24 pcs Ideal 50-2300AN Adapter for the Ledil ANGELINA

24 pcs Ledil Angelina 90 Degree reflector

24 pcs Graphite Thermal pad(TIM) 1 side adhesive for simple assembly on the COB

3 pc PF-P400CC-C140-DIM, 400 Watt LED driver, 286Vout, Dimmable driver allows the COBS to be run at just under 50 watts, the sweet spot of wall plate efficiency

24 Passive Pin fin Coolers suitable for the 50 watt drive( based on eff% calculations), predrilled and tapped for the Ideal Holder and adapter( you will only need a screw driver not a drill press)140mm x 80mm

96 pcs M3 6mm screws for the Holders

96 pcs M4 12mm Screws for mounting to side rails

30 Wago 221-412 Terminal Blocks

40 ft 15 ft of Black and Red Silicon 600V rated 18AWG Wire
 
D

Dave455

Well-Known Member
travis11952 said:
Hey wanted to know what people thought of this deal i found. Cant post the link but this is what it includes. It is a DIY, but they just pre packaged all the materials for you.


24 pcs Cree CXB3590, top bins only

24 pcs Ideal 50-2303CR CXB Holder

24 pcs Ideal 50-2300AN Adapter for the Ledil ANGELINA

24 pcs Ledil Angelina 90 Degree reflector

24 pcs Graphite Thermal pad(TIM) 1 side adhesive for simple assembly on the COB

3 pc PF-P400CC-C140-DIM, 400 Watt LED driver, 286Vout, Dimmable driver allows the COBS to be run at just under 50 watts, the sweet spot of wall plate efficiency

24 Passive Pin fin Coolers suitable for the 50 watt drive( based on eff% calculations), predrilled and tapped for the Ideal Holder and adapter( you will only need a screw driver not a drill press)140mm x 80mm

96 pcs M3 6mm screws for the Holders

96 pcs M4 12mm Screws for mounting to side rails

30 Wago 221-412 Terminal Blocks

40 ft 15 ft of Black and Red Silicon 600V rated 18AWG Wire
Click to expand...
Why not consider Luminus cxm22 light engines from cob kits ?
 
Randomblame

Randomblame

Well-Known Member
travis11952 said:
Hey wanted to know what people thought of this deal i found. Cant post the link but this is what it includes. It is a DIY, but they just pre packaged all the materials for you.


24 pcs Cree CXB3590, top bins only

24 pcs Ideal 50-2303CR CXB Holder

24 pcs Ideal 50-2300AN Adapter for the Ledil ANGELINA

24 pcs Ledil Angelina 90 Degree reflector

24 pcs Graphite Thermal pad(TIM) 1 side adhesive for simple assembly on the COB

3 pc PF-P400CC-C140-DIM, 400 Watt LED driver, 286Vout, Dimmable driver allows the COBS to be run at just under 50 watts, the sweet spot of wall plate efficiency

24 Passive Pin fin Coolers suitable for the 50 watt drive( based on eff% calculations), predrilled and tapped for the Ideal Holder and adapter( you will only need a screw driver not a drill press)140mm x 80mm

96 pcs M3 6mm screws for the Holders

96 pcs M4 12mm Screws for mounting to side rails

30 Wago 221-412 Terminal Blocks

40 ft 15 ft of Black and Red Silicon 600V rated 18AWG Wire
Click to expand...

Nice setup, but as cobkits mentioned better take the Bridgelux Vero29, gen.7 instead of the Cree 3590‘s.
Are you located in Australia? If not there are other places to get what you need, eg. cobkits.com.
I would contact the seller if you can not find a Vero29 kit on their website.

BTW,
@welight/Mark is also member of this forum. You can send him a PM if you want and I'm sure he will answer and help immediately when he see the message.

You should also inform yourself about LED strips and boards. An interesting thread from "down-under" that might interest you could be this one:

https://www.rollitup.org/t/strip-leds-in-the-garden-of-paradise.954799/
 
You must log in or register to reply here.
Top