I built a 16 sire cloner using a 15 gallon rubbermaid.
I used a 396 GPH pump and 12 360 degree sprayers
I also have a medium air stone in the water.
My issue is that the water in the tub depletes at a very rapid rate. I cover the pump fully which usues around 7-8 gallons. when I come back after 24 hours the water level is barely halfway up the pump. I'm worried I"m going to burn out the pump.
I don't know where the water goes, does it just evaporate? I have no leaks.
Does the air stone make the water evaporate more quickly?
Why is it going through multiple gallons of water a day, I'm lost.
I used a 396 GPH pump and 12 360 degree sprayers
I also have a medium air stone in the water.
My issue is that the water in the tub depletes at a very rapid rate. I cover the pump fully which usues around 7-8 gallons. when I come back after 24 hours the water level is barely halfway up the pump. I'm worried I"m going to burn out the pump.
I don't know where the water goes, does it just evaporate? I have no leaks.
Does the air stone make the water evaporate more quickly?
Why is it going through multiple gallons of water a day, I'm lost.