DIY

So I want to show you and also help others who also have trouble reaching the back of there grow tent when they water. Especially the people with the bad back syndrome this will solve all your problems lol. So here we go first you get your self a bucket and some clear tubes at your nearest hardware store and make sure you grab a lid for the bucket. So the second thing you do is go on amazon or eBay and get you that 5gallon electric water dispenser. Now assembling part first I match and traced the dispenser the closest to the edge with out cutting anymore than I need to. Next I used a sharp edge nice and went the the circle I traced and started to spin the sharp knife in circles while adding pressure and the it drilled rite through with a perfect circle just enough for the hose to fit so that it will be easier to get water in the dispenser. After that I put the hose in threw the top going down and see if it lines up it should. I held the dispenser up and used a hot glue gun and I put it on the circle I traced then laid the dispenser down on top o the hot glue and finished up on the sides to add extra glue to seal the side. The last thing is connect your hose to the tip and get you a stick maybe stay and from zip ties cause when you cut the extra off it’s sharp and will hurt your babies. I hope this can help you on your next grow until next time peace and love be with you all.

Great idea.
I used PVC in the past. I made a square out it and it just rested on the top of my pots circling my plant, also drilled small holes in the bottom of the PVC and had 1 main pvc pipe coming off of the square that shot out to the front side of my grow. Used a new/clean oil funnel and just poured it in. I'll try and find a pic of it. But your idea is great to.