Growroom setup advice

JoPotato · Sep 9, 2022

Hi there!

I am looking for a bit of advice.

My current setup is
1x CREE CXB3590 3500k (has a lens)
3X CITIZEN CLU048 1212 3500k (2 has lenses, 1 broke )
each cob powered by a meanwell LPC60-1400,
and squeezed into a 60x60x140cm grow tent.

I want to ask, is this lighting correct with 4 of these lights on one plant in such a sized tent, or would I potentially be able to grow two or more plants under these lights in a bigger room?

Many thanks!

coreywebster · Sep 10, 2022

What you hitting there, about 50w a cob?

200w ish?

You might be able to squeeze an extra few inches .
Like 60x75cm but not enough to flower two plants and see any benefit over one plant in terms of yield

Probably just stick to what you have and possibly remove all reflectors because your limited on height

1212ham · Sep 10, 2022

JoPotato said:
Hi there!

I am looking for a bit of advice.

My current setup is
1x CREE CXB3590 3500k (has a lens)
3X CITIZEN CLU048 1212 3500k (2 has lenses, 1 broke )
each cob powered by a meanwell LPC60-1400,
and squeezed into a 60x60x140cm grow tent.

I want to ask, is this lighting correct with 4 of these lights on one plant in such a sized tent, or would I potentially be able to grow two or more plants under these lights in a bigger room?

Many thanks!

120-160 watts is common for a 60x60 and the 1212s should run about 36w at 1400ma. I would remove any lenses or reflectors.

Growroom setup advice

JoPotato

New Member

coreywebster

Well-Known Member

1212ham

Well-Known Member

Similar threads