Inexpensive Aeroponics Cloning Growbox

WrldWidRadio911

Well-Known Member
Bought 2 rubber maid containers and the lid is reversible (kinda) but its a perfect fit!!!

I also put in a 14 inch air stone for roots that make it to the watter:blsmoke:

HPIM0442.jpg


HPIM0443.jpg


HPIM0446.jpg


227536a27900.jpg


52a59b7a9e1a.jpg


4b6222fded79.jpg
 
Pretty cool you made it alot more complicated then need to but nice job.Just buy a 4 buck rubber made container with lid 6 3 inch net pots about $.23 cents each 1 1/2 inch pvc pipe $1.48 2 caps $.28 cents each and a water pump about $18 bucks 3 feet 1/2 tubing for $3 bucks and 4 mister heads $.50 cents each Total cost about $31 bucks and about hour of time good to go.
 
Cool, yeah I looked up some growing mediums and found those right after I posted this and found that.(I feel like an idiot).
 
I think I might try it this way!
Gonna get the box, air stones, and the fogger.
But do this instead.
top00000.jpg


:joint: Love your idea dood!
 
they're easy to make, heh, if i can do it...

i don't use net pots or collars, i pull the slips and transplant at first root.
 

These little piezoelectric foggers ARE fascinating, aren't they?

However, I've mucked around with them and found that they don't work well for long periods in nutrient solutions. Through the action of the piezo element's vibration, nutrient salts will precipitate and stick to the element after a few weeks, increasing its mass to the point where it can't vibrate enough to produce fog.

They will work for a while; you might be able to extend their life by cleaning the piezo element every week or so.

I'm wondering if the vibrating action is sufficient to separate nutrient salts from the water fog. Some clever soul will find a way to collect the fog and get it to condense in sufficient quantity so it could be measured with a nutrient meter and compared to the nutes in the solution.
 
Back
Top