My turn to have help (pics)

OK i just received my 1000w ballast
The ValuLine Ballasts are the best value priced garden lighting ballasts available. The cases are powder coated galvanized steel, vented to provide cool operation. They have a vibration dampening system for noise reduction. They are very quiet. All ValuLine lighting can be run at 120 or 240 volts. No rewiring is necessary. 240 volt power cords are available below. They will all run either M.H. or H.P.S. bulbs (with the exception of 600w which will run H.P.S. bulbs only.)

also got a Cool Tube Reflector

the problem is the wiring wont fit take a look at the 2 first pics
at the third and fourth pics you can see the reflector
Last pics is my extra wire the question is


Can i open my Ballast and make the connect between Ballst and my extra wire ?

you could wire it yourself but better not to. i had the same issue and the hydro store had an adapter that joined the two wires

you dont know how much i love you Desertrat!!!
now atleast i know that im not 100% screwed

+Rep

yar get an adapter from the hydro shop. the ballasts at htg have the right connectors on em to fit the cooltube but since yers dont just get you and adapter .
just dont rewire or you void your warranty

No homo shit slick

lol

Phinxter said:

yar get an adapter from the hydro shop. the ballasts at htg have the right connectors on em to fit the cooltube but since yers dont just get you and adapter .
just dont rewire or you void your warranty

Click to expand...

yeah lol i didnt think about the warranty
if anyone have a link or the name of that connectors plz let me know
im so happy i really tought i was screwed im learning alot for my first grow
and my babys are doing very good

PITTSBURGHZ.FINEST said:

No homo shit slick

lol

Click to expand...

hahaha you guys know what i mean. Dude i was desperate i asqued the same question in my growing journal and a guy who usually gives me good answers just said DAAAMNN !!

lol

Excellent advice, I must say.

i am a bit confused tho the cord thats built into real cool tubes plugs right into that one on you ballast. the one you show with the 3 round posts in the black rubber plug pic number 2 is that attached to the cool tube or to a loose screw shell ?

here is your adapter at any rate Hydrofarm Receptacle Adapter Brand S (Indoor Hydroponic Lighting / Hydroponic Lighting Accessories)

Phinxter said:

here is your adapter at any rate Hydrofarm Receptacle Adapter Brand S (Indoor Hydroponic Lighting / Hydroponic Lighting Accessories)

Click to expand...

you guys are awsome thank you so much

i think its not the good Adapter :s

or it might be the good one lol

ok this is the right one 100% http://www.hydroponics.net/i/131832


thank you evryone