Ok so this winter i had such a good time growing indoors i decided to let the sun boost my yield. I built a NFT kinda system in a tube (pretty much whats used for septic pipes or maybe really big electrical wires) with 7 - 5" net pots. The whole thing is filled with inert pebbles.
The pebbles have been rinsed and dried and rinsed a few more times, the tube was blasted with a hose, and the hose used to bring the nutrient/water up and what gravity feeds back down is all new and clean.
Im just starting out with my plants being maybe 6 inch tall i have 3 tomato and 4 bell pepper so the ppm's are only around 600 but I cant seem to get the PH under 7.4!!!
At first not knowing how much i needed to keep in my tote so my pump didnt run dry i filled it with a hose till the pump turned off, marked it, and used a empty gallon jug to measure how much it would take. Me not thinking about only using weak nutes filled it back up with tap and PH was way high. So i empty it all out and go buy 8 gallons of distilled water which i added the nutes to, tested it, and did the math to figure out my nute needs.
Well now im still at 7.4+ (even tho i tested it at 5.8 before i made all the jugs). So what do i do, i go and buy some PH down from the pet store made of sulfuric acid, i pull ouy a gallon and 2 drops works like a charm instant success!!! So i do the math, add in 14 more drops and test.....its 7.4+ again. Ok ill wait a few hours and double it up...still 7.4 So now im spraying this stuff like hot sauce into a giant chili and it starts to change wahoo its yellow, 2 hours later its blue again what in the world am i looking at here???
Sorry for the short book i just figured id let all the details be known so to lessen the questioning tag =)
The pebbles have been rinsed and dried and rinsed a few more times, the tube was blasted with a hose, and the hose used to bring the nutrient/water up and what gravity feeds back down is all new and clean.
Im just starting out with my plants being maybe 6 inch tall i have 3 tomato and 4 bell pepper so the ppm's are only around 600 but I cant seem to get the PH under 7.4!!!
At first not knowing how much i needed to keep in my tote so my pump didnt run dry i filled it with a hose till the pump turned off, marked it, and used a empty gallon jug to measure how much it would take. Me not thinking about only using weak nutes filled it back up with tap and PH was way high. So i empty it all out and go buy 8 gallons of distilled water which i added the nutes to, tested it, and did the math to figure out my nute needs.
Well now im still at 7.4+ (even tho i tested it at 5.8 before i made all the jugs). So what do i do, i go and buy some PH down from the pet store made of sulfuric acid, i pull ouy a gallon and 2 drops works like a charm instant success!!! So i do the math, add in 14 more drops and test.....its 7.4+ again. Ok ill wait a few hours and double it up...still 7.4 So now im spraying this stuff like hot sauce into a giant chili and it starts to change wahoo its yellow, 2 hours later its blue again what in the world am i looking at here???
Sorry for the short book i just figured id let all the details be known so to lessen the questioning tag =)