Another Realm
Active Member
************Look closely****************
AK47, Critical Mass, California HASHPLANT, and Some GD Purp.
all have the same symptoms
System-Aeroflo
Lighting-2-600W HPS COOLTUBE (aircooled)
Ventilation- 2 elicent cent. fans 450 and 850 CFM
70-76F
45-60% humidity
67-69F res temps
Circulating fan
currently at 100PPM never went higher than 200PPM
Hello this is my first post but I've grown all types of different methods. Currently my setup is 2 aeroflo-like systems with 28 sites total under 600HPS aircooled by 450CFM Intake and exhausted with a 850 cfm, the room is circulated by 18" fan. My nutes are:
3-part general hydro (grow,micro,bloom)
Cal-Mag Plus
Liquid Karma
Hygrozyme
I started off with .2 EC, the plants were slighty yellowing so I upped the EC to .4 and they continued to yellow at the tips, one of my established clones then started dying off(yellowing) . Ive tried to keep the PH between 5.6-6.3 it has stayed toward 6.0-6.2, seems to be very hard to keep below 6.0. The pump is run on for 1 min and off for 5 mins. each plants' roots are going nutz like they do in aero but above seems shakey. The temps in the rez stay around 67-68, and the room temps stay around 75F. ranges from 68-79. the plants are about 18" from the plants. EVERYTHING SEEMS PERFECT! its very frustrating, any Ideas from someone experienced. Ive read that after clone its cool to give like anywhere from 800-1500 PPM of nutes. Ive never went above 200 and now its at 100PPM. Am I just a pussy and I should give em some nutes. Could they really be deficient? THANKS FOR ANY RESPONSE.
AK47, Critical Mass, California HASHPLANT, and Some GD Purp.
all have the same symptoms
System-Aeroflo
Lighting-2-600W HPS COOLTUBE (aircooled)
Ventilation- 2 elicent cent. fans 450 and 850 CFM
70-76F
45-60% humidity
67-69F res temps
Circulating fan
currently at 100PPM never went higher than 200PPM
Hello this is my first post but I've grown all types of different methods. Currently my setup is 2 aeroflo-like systems with 28 sites total under 600HPS aircooled by 450CFM Intake and exhausted with a 850 cfm, the room is circulated by 18" fan. My nutes are:
3-part general hydro (grow,micro,bloom)
Cal-Mag Plus
Liquid Karma
Hygrozyme
I started off with .2 EC, the plants were slighty yellowing so I upped the EC to .4 and they continued to yellow at the tips, one of my established clones then started dying off(yellowing) . Ive tried to keep the PH between 5.6-6.3 it has stayed toward 6.0-6.2, seems to be very hard to keep below 6.0. The pump is run on for 1 min and off for 5 mins. each plants' roots are going nutz like they do in aero but above seems shakey. The temps in the rez stay around 67-68, and the room temps stay around 75F. ranges from 68-79. the plants are about 18" from the plants. EVERYTHING SEEMS PERFECT! its very frustrating, any Ideas from someone experienced. Ive read that after clone its cool to give like anywhere from 800-1500 PPM of nutes. Ive never went above 200 and now its at 100PPM. Am I just a pussy and I should give em some nutes. Could they really be deficient? THANKS FOR ANY RESPONSE.
Attachments
-
153.4 KB Views: 35
-
64.3 KB Views: 33
-
139.9 KB Views: 30
-
120.5 KB Views: 28
-
109.8 KB Views: 22
-
149.5 KB Views: 27
-
189.7 KB Views: 16