ta2drvn
Well-Known Member
I recently purchased a wardrobe from Big Lot's for all my starters but you could easily have it set up for a perpetual grow of 5 plants.
It has a top level that I put a 2' cfl ballast this is about 12" high (perfect for clones and maybe possible for small mothers, but I am using another area) then it has a left and right side, each is about 4' tall and is about 2.8ft X 3.2ft, one side has no shelves (area for larger plants or monthers in my case) I have a 175w in that area and other side has two adjustable shelves (I am only using one to divide in about half (5 x 1 gallon pots fit perfect and 6 will fit a bit tight in each section) these will be my veggin plants and will be moved to a flowering station.
I am building this box for a clone/mother/veggin box. I have mylar rapping the inside and the mini floro's were also on sale at Big Lot's 3 pack for $15 and they are 70 watts ea. I have a total of 8 in the cab, maybe I'll use that last one (I bought 3 of the 3 packs of lights)
This was not cheap, but not too expensive about $140 for lights, $24 fans, $30 mylar, $13 duct tape and insulation tape for better seals, $30 exhaust vents, $100 cabinet so about $340 . I think there are several things that can be done better on the next one and for a little less cost, maybe able to get cost down below the $300 mark.
Feel free to give me any feedback on how to improve on this as I will be starting a second one of these in the next month so any help would be appreciated.
It has a top level that I put a 2' cfl ballast this is about 12" high (perfect for clones and maybe possible for small mothers, but I am using another area) then it has a left and right side, each is about 4' tall and is about 2.8ft X 3.2ft, one side has no shelves (area for larger plants or monthers in my case) I have a 175w in that area and other side has two adjustable shelves (I am only using one to divide in about half (5 x 1 gallon pots fit perfect and 6 will fit a bit tight in each section) these will be my veggin plants and will be moved to a flowering station.
I am building this box for a clone/mother/veggin box. I have mylar rapping the inside and the mini floro's were also on sale at Big Lot's 3 pack for $15 and they are 70 watts ea. I have a total of 8 in the cab, maybe I'll use that last one (I bought 3 of the 3 packs of lights)
This was not cheap, but not too expensive about $140 for lights, $24 fans, $30 mylar, $13 duct tape and insulation tape for better seals, $30 exhaust vents, $100 cabinet so about $340 . I think there are several things that can be done better on the next one and for a little less cost, maybe able to get cost down below the $300 mark.
Feel free to give me any feedback on how to improve on this as I will be starting a second one of these in the next month so any help would be appreciated.
Attachments
-
75.7 KB Views: 121
-
76.3 KB Views: 80
-
76.7 KB Views: 52
-
66.6 KB Views: 37
-
59.7 KB Views: 42
-
56.9 KB Views: 58
-
45.2 KB Views: 45
-
51.3 KB Views: 93
-
98.1 KB Views: 30