Hotwired
Well-Known Member
Hi everyone 
I will be installing a Can filter 66 with a 6" or 8" Can fan with at least 300 cfm. This combo will blow out thru a hole in the roof. My room is 12' x 10' x 8' high and I will have air cooled(hopefully) 4 x 1000 watt hps lights. These lights will be used for 12/12 only and nothing else.
The only air intake is my central a/c duct which turns on about every 20-30 minutes cooling my whole house (and the grow room) to 77 degrees. Always hot here in Florida
. There is no other air intake except the door to enter the room. The window is blocked off for security reasons.
I really can't have the door stay open cause I'm afraid of the smell thru the rest of the house. I can bring in air from another cooled room via the attic but that would be used to air cool the lights and not for fresh air intake.
I am trying to figure out if I can air cool the the lights by pulling air from the other cooled room, thru the ducting and the 4 lights, and out thru the can filer/fan combo which goes out thru the roof. But if I do this I think the fan would have to stay on 24/7 and would suck up all the air in the room.
My questions are:
1) Can this work with only the A/C vent in the grow room running every 30 minutes?
2) Would I have to separate the air cooled lights and filter/fan combo to their own exhausts systems?
3) How long do people usually leave their filter/fan combos running for? Is this a 24/7 thing or do you use them when you need it?
I have a few ideas in mind but I just wanted to ask the pros around here what they think. One of my ideas is to put a 300 cfm 6" fan in my attic above the "cool" room and suck the air from there thru a duct and into my grow area. Then drop down a "y" pipe from the ceiling in the grow area that would send air thru my reflectors AND down towards the floor thus increasing my air intake in the grow area. This would leave my filter/fan combo alone and able to run on a timer if need be and I could run the fan for the lights and air intake 24/7 if I like.
OR, would I need 2 separate intakes? 1 for the lights and 1 from another room with its own fan and ducting for the intake?
Basically I know a little bit of what's going on but I'm concered about the exhaust/intake part. I'm not sure how that works or how long those fans should stay on before they suck all the air out of the house and I implode from lack of air. Forget it, I think my brain already "ex"ploded by thinking too much
Any help or ideas will be much appreciated. Thanks

I will be installing a Can filter 66 with a 6" or 8" Can fan with at least 300 cfm. This combo will blow out thru a hole in the roof. My room is 12' x 10' x 8' high and I will have air cooled(hopefully) 4 x 1000 watt hps lights. These lights will be used for 12/12 only and nothing else.
The only air intake is my central a/c duct which turns on about every 20-30 minutes cooling my whole house (and the grow room) to 77 degrees. Always hot here in Florida

I really can't have the door stay open cause I'm afraid of the smell thru the rest of the house. I can bring in air from another cooled room via the attic but that would be used to air cool the lights and not for fresh air intake.
I am trying to figure out if I can air cool the the lights by pulling air from the other cooled room, thru the ducting and the 4 lights, and out thru the can filer/fan combo which goes out thru the roof. But if I do this I think the fan would have to stay on 24/7 and would suck up all the air in the room.
My questions are:
1) Can this work with only the A/C vent in the grow room running every 30 minutes?
2) Would I have to separate the air cooled lights and filter/fan combo to their own exhausts systems?
3) How long do people usually leave their filter/fan combos running for? Is this a 24/7 thing or do you use them when you need it?
I have a few ideas in mind but I just wanted to ask the pros around here what they think. One of my ideas is to put a 300 cfm 6" fan in my attic above the "cool" room and suck the air from there thru a duct and into my grow area. Then drop down a "y" pipe from the ceiling in the grow area that would send air thru my reflectors AND down towards the floor thus increasing my air intake in the grow area. This would leave my filter/fan combo alone and able to run on a timer if need be and I could run the fan for the lights and air intake 24/7 if I like.
OR, would I need 2 separate intakes? 1 for the lights and 1 from another room with its own fan and ducting for the intake?
Basically I know a little bit of what's going on but I'm concered about the exhaust/intake part. I'm not sure how that works or how long those fans should stay on before they suck all the air out of the house and I implode from lack of air. Forget it, I think my brain already "ex"ploded by thinking too much

Any help or ideas will be much appreciated. Thanks
