caddyluck
Well-Known Member
Hello all you stoners and growers at RIU! Like the title says this is to help Waterfarmers. All these Mods and Tips can easily be found online but in different places. This thread is to compile all known Mods and Tips, as well as new ones from you, the growers. Feel free to share your experiences and knowledge. I would like particularly for someone to post pics of a recirculating/chiller system, It would be extremly helpful and would probably earn some Rep
Mod
We all know about drilling holes for better root growth and drainage.
Factory holes...
After Drilling more and bigger holes....
Sorry for the blurrrr, but you get the point.....
Adding an airstone is also a common Mod. Here i installed an airhose below where the bottom of the growing chamber sits and above the water level. You can see in pen where each line is marked. I have had no problems with air flow and installed 4" airstones. Disk airstones are whats most recommended.
Adding shut-off valves should be a top priority, especially between the res and controller unit. When you go to pour water in the res to mix nutes, the water will just fill the controller unit.Pretty lame. Having a shut-off valve between the two allows you to mix the nutes and adjust ph if nessasary before releasing the solution the the controller unit. I also installed shut-off valves from the controller unit to the buckets, and on each individual bucket. It makes for ALOT easier maintence.
Tips
Salt build-up is common and more than likely will happen. Taking preventive maintence is key. Remove the rings and rinse with hot water once a week, you'll be glad you did.
I have twice in the past 5 weeks came across this problem. There would be no water coming from the drip ring, this was due to some kind of build-up on the air hose at the bottom of the bucket. It is a pain in the ass to try to remove the pumping column with a huge plant in the way but it has to be done. Once the column was removed the problem was identified, some kind of build-up in the air hose. If anyone has any experience combating this problem I would love to hear it.
PUMPING COLUMN
Gunky buid-up in airhose....
Good to go after rinsing with hot water.....
Well I hope this helps someone, feel free to ask questions if you want. If anyone has pics of a recirculating/chiller set-up please post, I would be much appreciated!!
Mod
We all know about drilling holes for better root growth and drainage.
Factory holes...
After Drilling more and bigger holes....
Sorry for the blurrrr, but you get the point.....
Adding an airstone is also a common Mod. Here i installed an airhose below where the bottom of the growing chamber sits and above the water level. You can see in pen where each line is marked. I have had no problems with air flow and installed 4" airstones. Disk airstones are whats most recommended.
Adding shut-off valves should be a top priority, especially between the res and controller unit. When you go to pour water in the res to mix nutes, the water will just fill the controller unit.Pretty lame. Having a shut-off valve between the two allows you to mix the nutes and adjust ph if nessasary before releasing the solution the the controller unit. I also installed shut-off valves from the controller unit to the buckets, and on each individual bucket. It makes for ALOT easier maintence.
Tips
Salt build-up is common and more than likely will happen. Taking preventive maintence is key. Remove the rings and rinse with hot water once a week, you'll be glad you did.
I have twice in the past 5 weeks came across this problem. There would be no water coming from the drip ring, this was due to some kind of build-up on the air hose at the bottom of the bucket. It is a pain in the ass to try to remove the pumping column with a huge plant in the way but it has to be done. Once the column was removed the problem was identified, some kind of build-up in the air hose. If anyone has any experience combating this problem I would love to hear it.
PUMPING COLUMN
Gunky buid-up in airhose....
Good to go after rinsing with hot water.....
Well I hope this helps someone, feel free to ask questions if you want. If anyone has pics of a recirculating/chiller set-up please post, I would be much appreciated!!