ISO hash oil - sharing the method i have been using for over a year now

Ivone

Member
Confusion here! So what's safer to make oil?

Isopropyl alcohol or Ethanol ? Or anything better to make RSO....
 

Ivone

Member
Confusion here! So what's safer to make cannabis oil to cure cancer etc?

Isopropyl alcohol or Ethanol or other?

Here what I found so far:

First confusion that I read:
"isopropyl alcohol is the absolute worst. I highly advise against it because the denaturing portion distills off @ exactly the same temperature as the water. What that means is any water residues that aren't fully heated off, will be in there and they are poisons to prevent people from drinking it. Ethanol is way higher selectivity, fit for human consumption, w no toxic residues. Yet even ethanol extract contains 200 times the cytotoxins from a soxhlet extraction ran for 24 hrs vs a supercritical fluid extract. It's really ghetto to use isopropyl. "
This person suggest Ethanol

So now back to drawing board WTF to use to make the RSO type oil.

Buthanol - "TOP guru using this one" - holy-anointing-oil-and-holy-shit oil
Isopropyl alcohol - "guys here"
Ethanol - "another using this one"
Naphtha - "RSO using that"

I mean this is getting serious and if I make it the wrong way I will offer dead in stead of cure, so I take this issue VERY seriously.
So far everybody talks about RSO (Rick Simpson Oil) - this one is good, but when applied orally people get stone like cows, plus test like shit.

Then I found "Holy Anointing Oil and Holy Shit Oil" - http://skunkpharmresearch.com/holy-anoi ... holy-shit/ - this one look great also.
Sounds like that taste must be definitely better then RSO, plus Coconut oil, Cinnamon Leaf oil, Cinnamon Bark oil, Myrrh Gum, BUT calls for "BHO Cannabis oil" and it means to use Butane for extraction.

I like the idea of all the great ingredients and even can add some more like: honey, olive oil, strawberry or raspberry extract to make it testier, but still keep the highest quality and potency. If used to cure cancer then high THC is desirable and for other treatments one can go with more CBD and less THC.

Input please................ TIA
 

Texas(THC)

Well-Known Member
never use Naptha

99% isopropyl and everclear are both safe and are the recommended solvents for making RSO

follow the recipes on skunkpharm
 

Ivone

Member
never use Naptha

99% isopropyl and everclear are both safe and are the recommended solvents for making RSO

follow the recipes on skunkpharm
Thank you very much Texas

It's going to be isopropyl alcohol as it can be bought here and it's not expensive at all.

Do you have any experience with producing oil? Should I just let it evaporate (as some one suggested) or should I decarb by heating it up as Rick?
 

sidewing

Well-Known Member
I think iso is the safest and also the easiest to evaporate off. I believe the rest leave some sort of residual
 

Ivone

Member
And the cheapest for me here in EU., plus hassle to find ;)

Now I have to find info about Canna Tincture making and I am ready to rock :(
 

isochronous

New Member
Pretty sure isopropyl is not denatured.. Rubbing alcohol is. Which is why it's important to check your label it should say isopropyl and water only.
Dude, rubbing alcohol is almost always isopropyl alcohol. The only difference most of the time is that rubbing alcohol is just a 70-71% concentration. If you just Google isopropyl alcohol the Wikipedia article lists "rubbing alcohol" as one of its other names.
 

GrowinDad

Well-Known Member
ISO is petroleum based. Denatured is grain alcohol with nasty stuff added in. I believe both could be used as "rubbing alcohol".
 

sidewing

Well-Known Member
Gotta disagree. Sure iso may be categorized as rubbing alcohol, but If you go to cvs or rite aid and look at the ingredients of "isopropyl alcohol" vs a bottle next to it that says "rubbing alcohol".. the iso is iso and water. The rubbing is like at least a few different chemicals. Not safe chemicals that don't ever purge or evaporate.
 

sidewing

Well-Known Member
nope i dont make e-juice. i use an e-cig style vaporizer made to take straight oil. theres many out there, i use the 'o-phos' because its discreet, and has interchangable cartridges. it comes with a little cone funnel to fill the cartridge. fits right on the top of the cartridge, and you just weigh out a gram of oil (or a little less if you want). then apply a lighter around the outside of the cone circling around the cone and as the metal heats the oil melts down into the cartridge. then i heat the top of the cartridge in the same manor to melt it all the way down to the bottom. then it just screws onto the vaporizer.
 
Top