DarthBlazeAnthony
Well-Known Member
I was told to try thisWhat brand of ph down were you using?
Attachments
-
52.5 KB Views: 18
I was told to try thisWhat brand of ph down were you using?
Hang in there man.Starting to have problems. Went out and got an ro system to see if i can save them. My tap ppm was like 450 and must be causing some lockout. Getting yellow spots between the veins on lower growth. Just tested some of the filtered water while the system is purging and its down to 80ppm and lowered the ph half a point. I guess my tap waters no good for hydro![]()
Depends in the water and buffers it has. My water needs more than most and has been my biggest hurdle. I now use 35% sulphuric I buy at the battery store. I tell them its for my aquarium lol.I tried to use PH down with my tap water and it would go back up by the next day. A RIU member told me that tap water cannot have the ph level lowered. I decided to get a 5 stage reverse osmosis system. Quite a few parts and setup but hopefully this will fix my ph problem.
390ppm's is to high imo. RO with a tad bit of bleach would be better. At least that's my 2 centsIts going really well so far. My tap water is 390ppm. 1/4strenght nutes right now in dwc and picked up a chiller last week. Ph has been perfectly stable so far going on 3 days and hasnt changed after res change and adjustments. Good to see your still around @jijiandfarmgang , you are always providing good info. I might pick up an ro system later this year but i keep asking myself why should i if tap water works just as well. I used ro on my first dwc and ph was always drifting up, but i was using gh ph down the whole time.
Seed started in rockwool, 6" net pot of hydroton.I just ran out of PH Down and ended up getting GH down. Ironically I get .07 shift per drop per gallon( 14 drops a point PG).
My ph has been very stable since I've been using it.
Just curious hydroton or rock wool?