Club 600
- Thread starter DST
- Start date
abe supercro
Well-Known Member
buddy runs the 120 like a champ. perhaps the mention of the smaller cloner is related to less water, which heats up by the pump, during summertime, easier.
wondering if the frozen packs can add substantial bacterium. also, can't one just soak the neoprene pucks in hydrogen peroxide to sterilize?
DST
Well-Known Member
Aye H202 would probably do as well.
Anyway
I have yellow fly paper hanging in every room like we having a party. I've installed a/c throughout the whole house. Got frozen bottles of water in every room. Air purifiers running, a sulphur burner for good luck, and like 300 no pest strips scattered randomly here and there. Oh. And in flushed everything like 10x. For some reason flushing 4 gallon pots down the toilet isn't working. Am I doing it right?
Anyway
I have yellow fly paper hanging in every room like we having a party. I've installed a/c throughout the whole house. Got frozen bottles of water in every room. Air purifiers running, a sulphur burner for good luck, and like 300 no pest strips scattered randomly here and there. Oh. And in flushed everything like 10x. For some reason flushing 4 gallon pots down the toilet isn't working. Am I doing it right?
DST
Well-Known Member
The h section that sits on top plugs straight into the pump. Only way would be to have an adjustable pump or lower rated one.
DST
Well-Known Member
Good old fairy. Sounds sweet. I've got plenty baskets spare lad.
Got to get these in the flower cupboard when everyone's gone to bed.
Mmmmn. Wonder if they will fit.
curious old fart
Well-Known Member
It seems that they have found the secret to Shakespeare's success......
Was Shakespeare HIGH when he wrote his works? New chemical analysis of tobacco pipes found in the Bard's garden suggests he had a taste for cannabis
South African scientists carried out a chemical analysis on broken pieces of pipe found in Shakespeare's garden in Stratford-upon-Avon, as well as in the grounds of his neighbours' homes.
cof
Was Shakespeare HIGH when he wrote his works? New chemical analysis of tobacco pipes found in the Bard's garden suggests he had a taste for cannabis
South African scientists carried out a chemical analysis on broken pieces of pipe found in Shakespeare's garden in Stratford-upon-Avon, as well as in the grounds of his neighbours' homes.
cof
Mohican
Well-Known Member
@DST - What is the water capacity of the cloner?
This is the model I use (gifted from @BobBitchen ) and it has a fairly deep reservoir.
It is about two beer cans tall. Can't find any specs. It is called a Clone King.
I am lucky because it is the exact duplicate of Bobs system and I can follow his method. I get roots in 4-7 days.
After 7 days:
Cheers,
Mo
This is the model I use (gifted from @BobBitchen ) and it has a fairly deep reservoir.
It is about two beer cans tall. Can't find any specs. It is called a Clone King.
I am lucky because it is the exact duplicate of Bobs system and I can follow his method. I get roots in 4-7 days.
After 7 days:
Cheers,
Mo
TheChemist77
Well-Known Member
what is the coverage area of your lec? yes mine is a horizontal reflector with ballast on top, i have 2, 2ft above a 4x6ft table and they seem to cover that area very well.. papers say each can cover a 2.8ft x 3.4ft area at 1 ft above canopy.. but with all the info i have all par values wer taken at 2 ft above so i figure ill keep it 2 ft above and cover a 3x4ft area...
what kind of coverage you get with the verticle reflector??
TheChemist77
Well-Known Member
my boulderlamp 315 watt agro uses a 3,100k phillips bulb with a weird 2 pin socket, looks kinda like the end of the flourecent tubes, 2 pins, both round, 1 is a little bigger than the other...They are different names for the same tech, in my understanding.
Lec stands for light emmitting ceramic. And cdl is ceramic discharge lighting.
The real differences are with the bulb used and the ballast to power them.
Mine are from advanced tech lighting, I'm about to be in the room shortly I'll see if I can snap a pic.
Here's a pic from advanced tech lighting website. They use a Philips 4k bulb with mogul socket and Philips 315w ballast, dimmable to 220w if warranted.
I think I paid $220 per kit but i had to get a reflector and ceramic sockets/wiring. Still worth it in my book!
I will add that I had to purchase a step up/down transformer to run these lights from a 110v socket. the ballasts run from 220v.
DST
Well-Known Member
It's about this high on a size 11.@DST - What is the water capacity of the cloner?
This is the model I use (gifted from @BobBitchen ) and it has a fairly deep reservoir.
It is about two beer cans tall. Can't find any specs. It is called a Clone King.
I am lucky because it is the exact duplicate of Bobs system and I can follow his method. I get roots in 4-7 days.
After 7 days:
Cheers,
Mo
Lol.
TheChemist77
Well-Known Member
i use the clone king 36 site and LOVE IT... i get roots in 7-10 days 100% success rate with plain ph balanced water..only problem with mine is i have to clean the sprayer heads every week with a safty pin, tweezers, and a Q tip.. i clean the collars by simply soaking them in a bucket of bleach water overnight then wipe them with a rag and rinse, but after a wile they shrink and fall throu holes so i buy new ones every 6 months or so..i hate cleaning the jets its a pain but seems like theres no way to keep dust,dirt,roots n dabree out of the thing, so gotta keep it clean..@DST - What is the water capacity of the cloner?
This is the model I use (gifted from @BobBitchen ) and it has a fairly deep reservoir.
It is about two beer cans tall. Can't find any specs. It is called a Clone King.
I am lucky because it is the exact duplicate of Bobs system and I can follow his method. I get roots in 4-7 days.
After 7 days:
Cheers,
Mo
BobBitchen
Well-Known Member
Yea @DST
I think the dome may be your problem, from what i'v read.
I use the clone king with 100% success
Healthy cuts non PH'ed tap water ( my water runs 76°f with pump on 24/7)
I'm not a fan of added clorine, I use h2o2 to sterilize,
I also use 5 ml KLN & 10ml pro tekt to 3gals water (what my res holds ) with success .
Give tap water, no dome, & 10 days of ignoring them a try... bet it works
Peace bob
I think the dome may be your problem, from what i'v read.
I use the clone king with 100% success
Healthy cuts non PH'ed tap water ( my water runs 76°f with pump on 24/7)
I'm not a fan of added clorine, I use h2o2 to sterilize,
I also use 5 ml KLN & 10ml pro tekt to 3gals water (what my res holds ) with success .
Give tap water, no dome, & 10 days of ignoring them a try... bet it works
Peace bob
Mohican
Well-Known Member
I think it may be too shallow. The sprayers are located too close to the stems and the water heats up more quickly. I din't think it made a difference how cloners were configured. Aparently it does.
Try a Clone King model and use @BobBitchen 's method. I was getting 50% results before and now I am getting 100%.
Cheers,
Mo
Try a Clone King model and use @BobBitchen 's method. I was getting 50% results before and now I am getting 100%.
Cheers,
Mo
BobBitchen
Well-Known Member
Mo may have something there, it seems all the aero probs i'v seen are from the shallow type cloners