Scrog on LED
- Thread starter Esteban Soto
- Start date
bassman999
Well-Known Member
I might scrog my current run.
It will be the first time.
In for the show
It will be the first time.
In for the show
littlejacob
Well-Known Member
Bonjour
90 x 3w diodes can't be 270w from the wall...maybe 200w max of blurple...if it is really 270w they are runned very hard = bad efficiency and short lasting
Good luck with this epistar panels...
How much do you pay for this (no more than 100/140 $ I hope for you!)
And it is 80lm/w panels...cxb 3590 @1400mA are 180lm/w...half the power in cxb will yield better...
We will compare our results...I have 200w of cxb over 1m2 half your power on the same surface...I bet on 250gr...1.2gpw...because I can see how they are healty!
Pics tonight!
CU!
Last edited:
littlejacob
Well-Known Member
Bonjour
Bassman (boom tss boom tss boom tss! Robert Armani/hit hard!)
Why do you want to scrog?
I would have advice you to do scrog with blurple...but with your cob no need to...!
CU
The Dawg
Well-Known Member
Hey Jacob What Difference Does It Make To You What Panel A Grower Uses. To Come Into Someone's Thread And Bash What Light Their Using Is RUDE. So If You Don't Have Something Positive To Add SHUT UP
bassman999
Well-Known Member
I never yield well. for some reason.
With HID like .3-.4 G/W.
Im not the best grower
I need ll the help can get to yield heavier.
Moving my girls in from garage since its soooo cold out there.
That might help a little
Esteban Soto
Active Member
I don't want to think that he meant any harm or wanted to trash my lights. But as I said before I'm from south america and things here are much more expensive and it is still illegal. The lights I already used them before in my previous grow and the same nutrients (I lost the phone with those pictures), they killed it. I was shocked with the yield because I though with the LED panels was going to be less than a HPS. And the quality of buds was just excepcional, working with DNA and the advantages of LED over HPS which is (or i've been told) that produces more thricomes, got me the high that I used to get when I lived in the US !!
All I can say man is that I like to be always humble until you see the final results. All we can do now is wait and see and so far I'm really excited as some other folks seem to be. So Peace bro, on friday I decided to flip and I will upload a new picture.
littlejacob
Well-Known Member
Bonjour
You could read all my posts...never be rude to anyone...
I am french and i don't have enough vocabulary to be rude as I want...lol
No it was to tell him that those are not very good...and aren't 270w...if he pull 200gr he is going to be in the gpw
It is not bashing...unless he build it...!
It is information...and I am sick since 2days maybe I was a bit tire too!
And I am not the only one who land on a thread to take care of others business! pas vrai le chien!
Sorry for that Esteban...I am pretty new here, sometime it is not easy to say what you really want to say in a foreign language (4 year learning English at school...no more)
But it doesn't change what I said...it was in a way to tell you it is not the best pannel and they are less watts than you thought...that's it...nothing against anyone...
@The Dawg I never read one of your post who was write to help...I can give you 10 avatar that I helped...and I am here since less than a year...!and you!?
Have a great day ★
You could read all my posts...never be rude to anyone...
I am french and i don't have enough vocabulary to be rude as I want...lol
No it was to tell him that those are not very good...and aren't 270w...if he pull 200gr he is going to be in the gpw
It is not bashing...unless he build it...!
It is information...and I am sick since 2days maybe I was a bit tire too!
And I am not the only one who land on a thread to take care of others business! pas vrai le chien!
Sorry for that Esteban...I am pretty new here, sometime it is not easy to say what you really want to say in a foreign language (4 year learning English at school...no more)
But it doesn't change what I said...it was in a way to tell you it is not the best pannel and they are less watts than you thought...that's it...nothing against anyone...
@The Dawg I never read one of your post who was write to help...I can give you 10 avatar that I helped...and I am here since less than a year...!and you!?
Have a great day ★
dionysus4
Well-Known Member
I know the dawg from back on bubbleponics and the man is a legend, i also know little jacob from icmag who came to me asking for help to build his lights then turned into a right rude little shit when he ordered the wrong number of cob holders(in his native language so no excuses) then couldn't figure out how to mark a heatsink and drill it in the right place claiming that the cob holders I suggested for him where the wrong ones lol
sorry OP
btw i love your canopy management skills
seen as this is your second grow i want to ask, what temperature is ur tent usually?( i find with leds a little on the warm side is usually good so curious what your have observed)
sorry OP
btw i love your canopy management skills
seen as this is your second grow i want to ask, what temperature is ur tent usually?( i find with leds a little on the warm side is usually good so curious what your have observed)
Esteban Soto
Active Member
Hey there! My panels tend to suppress a lot of heat, they have their own ventilating system. It's the beginning of summer here and as you can see they are holding on just fine . Being honest I've never actually checked temperature or humidity (I know big down for a grower).
I'm going to buy a thermometer and I'll let you guys know.
Im going to upload a new picture in a bit.
take care!
littlejacob
Well-Known Member
Bonjour
Do you talk about me...?
Cause I never order the wrong holders...I never order in my native language since Jerry's not french.....no problem for me to drill and to put cobs in the right place...
I guess you're confusing with another guy or I didn't understand what you said!
CU
littlejacob
Well-Known Member
And nobody help me on icmag...just inspired by buenogrow Vero10 setup...SupraSPL and many other here did...so remind me my rude post please!
CU
CU
Esteban Soto
Active Member
I just took this picture! I tied down some shoots that were right in the middle getting too big.
I'm going to switch to flower now.
I defoliated a bit so the light can get to more shoots. But my question is should I remove all the growth of the plants below the screen already? or let it grow and aport nutrients for another week or so?
SIDE VIEW (NEW)
FRONT VIEW (USUAL)
I'm going to switch to flower now.
I defoliated a bit so the light can get to more shoots. But my question is should I remove all the growth of the plants below the screen already? or let it grow and aport nutrients for another week or so?
SIDE VIEW (NEW)
FRONT VIEW (USUAL)
Esteban Soto
Active Member
Done! and tided more shoot and defoliated a bit more too and switched the timer to 12/12.
Now we wait, thoughts?
Now we wait, thoughts?
Will Thayer
Well-Known Member
Looking tidy now Esteban! Thanks for all the photos.
Cheers,
Will
Cheers,
Will
littlejacob
Well-Known Member
Bonjour
Excuse me esteban (nice plants man!) But when someone I don't know accuse me of something I never heard of I am a bit nervous....
So @dionysus4 could you please remind me what holders and where I was rude (post# and forum!?)
Thanks
CU
Excuse me esteban (nice plants man!) But when someone I don't know accuse me of something I never heard of I am a bit nervous....
So @dionysus4 could you please remind me what holders and where I was rude (post# and forum!?)
Thanks
CU
Esteban Soto
Active Member
drop it man, not the place nor the time. peace
littlejacob
Well-Known Member
Bonjour
Why should I drop it...I know it is bullshitt!
Just apologies or prove it...and I know you can't!
I will be in peace and no piss then!
CU
Why should I drop it...I know it is bullshitt!
Just apologies or prove it...and I know you can't!
I will be in peace and no piss then!
CU
littlejacob
Well-Known Member
Bonjour
Tu devrais pouvoir me repondre bouche en bois...si je te l'ai demandé dans ma langue tu dois donc la parler!
Alors vas y repond...putain j'ai les couilles a l'envers a cause d'un sale menteur comme toi...même pas capable d'apporter des preuves aux conneries qu'il déblatére...pauvre merde!
Ca c'est fait!
Tu devrais pouvoir me repondre bouche en bois...si je te l'ai demandé dans ma langue tu dois donc la parler!
Alors vas y repond...putain j'ai les couilles a l'envers a cause d'un sale menteur comme toi...même pas capable d'apporter des preuves aux conneries qu'il déblatére...pauvre merde!
Ca c'est fait!