Main lining the stalk

Blunted 4 lyfe said:
Why not cook your own shit has the same shit and most likely cheaper and one hell of a boost of K:

Bottle of blackstrap molasses. 1.89 or Granmas but blackstrap is much better.
Bunch of bananas ( wallyworld) .54 a pound.

4 banana peels 2 tbspn of molasses in a quart size pot full of water boil for 5 min let cool feed in plant soil or foliar feed. I use it every feed in flower.

B4L
Click to expand...
Bro i use 2 bananna peels, 1 whole juiced mango and 1 tsp molasses. Gooood shit! Soil foams alive like a mother fucker lol
 
Has anyone topped or FIMed and seen the water leech out of the top where you made your cut. This actually makes a lot of sense to me. Do they make stainless steel IV needles to prevent rust?

Alcohol and flame sterilize that needle.

I have a bunch of IV bags and seem needles, you have me thinking :-)
 
saiyaneye said:
Has anyone topped or FIMed and seen the water leech out of the top where you made your cut. This actually makes a lot of sense to me. Do they make stainless steel IV needles to prevent rust?

Alcohol and flame sterilize that needle.

I have a bunch of IV bags and seem needles, you have me thinking :-)
Click to expand...
hypodermic needles are made of stainless but good stainless is high carbon usually so it will rust
 
makes me wonder if you cut a plant in half and put it back together with a piece of hose and two clamps but leave a gap between pieces with a fitting for a IV tube what would happen
 
tekdc911 said:
makes me wonder if you cut a plant in half and put it back together with a piece of hose and two clamps but leave a gap between pieces with a fitting for a IV tube what would happen
Click to expand...


Lol, put a barbed plastic fitting with tape or not too tight zip ties in ur plant with a hose lol.
 
saiyaneye said:
Lol, put a barbed plastic fitting with tape or not too tight zip ties in ur plant with a hose lol.
Click to expand...
ive actually tried injecting CS with a hypo its alot harder then you think it would be .... not talking about the hollow middle ( well done that too ) there is some serious pressure going on already and the stalk is really some tough shit
 
see i am not totally nutz here

u the man @tekdc911

saiyaneye said:
Lol, put a barbed plastic fitting with tape or not too tight zip ties in ur plant with a hose lol.
Click to expand...

u are partly right even tho u were joking
tho the ones side will need to be metal to break the skin then use a piece of spandex (so the trunk can grow) and i will keep pressure on the bladder getting fed from a tube


reall think about it guys a way to max out any plant with out need for a massive root system (talking 10 gallons soil bags 20 gallons)
 
tekdc911 said:
makes me wonder if you cut a plant in half and put it back together with a piece of hose and two clamps but leave a gap between pieces with a fitting for a IV tube what would happen
Click to expand...

that very thing happend on that weed show .....someone came to the guys site and broke all the stalks on his plants.....
it is possible to repair it u need to splint it then honey around the crack ( i am guessing here but a 2 inch clean cotton soak one side in honey and then wrap it around the wound ) it takes time for it to fix and really mess with it but the honey will help keep the cells alive and help seal it with out allowing bad stuff to attack the plant
 
my thought was cut it under water and then repair it under water then there would be no air to mess anything up and the pressure of the plant take over from there aslong as it was all sterile .... but as far as a iv bag i dunno you would prolly need something pushing the water or whatever into the plant otherwise the plant would just be pushing the juices out instead of taking it in
 
tekdc911 said:
my thought was cut it under water and then repair it under water then there would be no air to mess anything up and the pressure of the plant take over from there aslong as it was all sterile .... but as far as a iv bag i dunno you would prolly need something pushing the water or whatever into the plant otherwise the plant would just be pushing the juices out instead of taking it in
Click to expand...

i had a weak stalk so i tested the honey on it .......with in 18 hours it was absorbed (and i did look down in the pebbles to see if u could find a sticky one DWC none)

ok think of a piece of metal (ment for a 1 inch stalk can make a 1/2 in but the metal has been pressed out with tiny cones like a dart tip head ....a prefect even spaced spikes pushing to one side about 4mms so 1 mm can be cut off make it a bunch of little bendable wrap-able needles that could be pressed on passing the skin and allowing the cells to pull the pack of that has a plastic black back expanding only 15mm from the back but rem we already have 3 mm tips and has a nipple for line .......now a black line to a feed bag (with nutrients and all it has to be sterilized some how or blacked out to lessen the chance of something forming in it now to hold it a piece of spandex held on with a ace bandage lock the nipple sticks out where u made a slit

now once u put the water in there the cells should accept it and not heal off if got it down right ...........so water the plant it pulls root the bag is under sealed pressure if it does not go negative the bag will not drain but if positive it might back flow that 15mm but gravity pressure should keep it from going higher if does the black line .....but as long as the plant is not drowning it should always have a need for water with the lights on

hence auto plants running on a 24/0 could out produce any photo in the market in half the time
 
Last edited:
if u have ever gone out on old farm land look at a tree on a fence line the plant will accept it and even grow over it ..........it is a matter of it accept it not sealing it off and us getting it right about what it wants

but i need time on a mass spectroscope and at least 100 different fluid samples

then i am going to need access to industrial/pharmaceutical grade chemicals
 
i was honestly hoping there would have been enough ppl with the same idea to have a few variables knocked off for me to at least attempt it

but nothing u were the only one @tekdc911 ...........sorry u are out of the game u were good
but thanks to u i know a pressure issue if i try to Vein it .....to do it would need to equalize it ( i am thinking with a butterfly needle doing it on the 3 week of veggie ....u know low enough so the cells build around and in the pump zone) after having so many things poked in me i know the way it goes in vs the flow path matters ......so that is a experiment in it self

and what u tried did not work .....if u could please a detailed info
what fluid was used
what did u try to save it
what need gauge needle did u use
what was the age of the plant at insertion
did it live and produce if so what was results
how long after u added it before it died / u call it
did u use anything on the inject site to seal it and what was it ...how was the reaction
did u sterilize the needle and the insertion site if so with what .....what was the reaction
 
Last edited:
i say this now if anyone steals the idea makes a shit load of money please just give me 1.5 million i can make that work for rest of life ......thank u rest is all yours with my blessing for finishing the work

if u steal it and make a shit load of money and offer me none ........karma is a bitch rem that

i would finish this work if i could but as it project end time is 10 years plus to run the variables on trail and error method

if u got the equipment i pay for the time to do the work
 
and what u tried did not work .....if u could please a detailed info
what fluid was used : colloidal silver 60 ppm
what did u try to save it
what need gauge needle did u use : 22ga 5\8" puppy syringe 3 cc
what was the age of the plant at insertion : preflower roughly on a auto
did it live and produce if so what was results : other then some weird growth right after the few days of injection nothing changed
how long after u added it before it died / u call it : full term
did u use anything on the inject site to seal it and what was it ...how was the reaction : figured the colloidal silver was enough to sterilize it .........
did u sterilize the needle and the insertion site if so with what .....what was the reaction : CS no reaction


i was hoping i could flip a plant or just a branch with just a injection i even went as far as filling up the hollow stem with CS ..... had no effect either way
 
Last edited:
Yodaweed said:
Troll post or is this guy this stupid?
Click to expand...
are u talking about me

sure call me names ....just like the guy that invented blood transfers ....or the one that figured out can spin red blood cells off and get plasma to pump back into ppl

at least i am trying to progress the work on the plants ...figure out the next step at increasing them .....the plant is just a bio engine that makes products that i like i want to super charge that engine ......u see it done in the human body by BLOOD PACKING cyclist runner marathon ppl
 
honestly it should be simple with the right tools and access to pure chemicals

plants are just simple bio engines .......that is if i figure out the right ratio and mix of chemicals it wants it can be pumped up .......just like blood packing making the ppl work harder but less tired so they can go longer thanks to all the extra red cells in the blood carrying the oxygen to the cells and removing the lactic acid building up in muscles

DUH .....so if i can figure out the right thing it can do the same in a plant as it is a bio engine too

getting tired of these ppl with low IQs going are u dumb or trolling ............ 1 i never fucking troll not fucking once hell i had to go look up the meaning i did not know what it was

i looked around to see if anyone tried this approach ........so far no one but Tekdc911 has even thought of it his try failed but gave me info of what not to try
 
justugh said:
honestly it should be simple with the right tools and access to pure chemicals

plants are just simple bio engines .......that is if i figure out the right ratio and mix of chemicals it wants it can be pumped up .......just like blood packing making the ppl work harder but less tired so they can go longer thanks to all the extra red cells in the blood carrying the oxygen to the cells and removing the lactic acid building up in muscles

DUH .....so if i can figure out the right thing it can do the same in a plant as it is a bio engine too

getting tired of these ppl with low IQs going are u dumb or trolling ............ 1 i never fucking troll not fucking once hell i had to go look up the meaning i did not know what it was

i looked around to see if anyone tried this approach ........so far no one but Tekdc911 has even thought of it his try failed but gave me info of what not to try
Click to expand...
If you get rich you owe @tekdc911, 1.5 million.
 
You must log in or register to reply here.
Back
Top