Whats wrong with my plant?
- Thread starter Florists
- Start date
-
- Tags
- problem weed growing
nomofatum
Well-Known Member
The purpose of venting is 3 fold:
1. Humidity Control
2. Temp Control
3. Get Fresh air with decent CO2 levels in there.
Without venting you have to solve these problems another way.
Dehumidifier
A/C
CO2 supplementation
...
If your grow is small enough, you may be able to get away with passive venting, but you should still put a small fan of some type in there.
Step 1: get a weather station to monitor RH and Temp. Report your current RH and Temp
Step 2: get lights setup to proper levels, check heat and RH after.
Without any airflow your odds for mold are quite a bit higher. Plants could also show slowed growth/bud formation due to lower CO2 if air exchange is extremely slow.
nomofatum
Well-Known Member
Something like this will work.
http://www.amazon.com/dp/B012BKZC86
I have different ones (comfort zone), but a couple have failed, so I would try a different brand like the ones I linked to.
I'm guessing from previous posts that you are not in the USA, so your brands/models may be different, but you can make any smaller fan like that work.
http://www.amazon.com/dp/B012BKZC86
I have different ones (comfort zone), but a couple have failed, so I would try a different brand like the ones I linked to.
I'm guessing from previous posts that you are not in the USA, so your brands/models may be different, but you can make any smaller fan like that work.
nomofatum
Well-Known Member
You gave your temp in Celsius instead of Fahrenheit.
nomofatum
Well-Known Member
Still 3+ weeks. Exchanging air is the easiest way. CO2 can be added by a burner, dry ice, brewing alcohol/beer/wine, or bottled CO2. You don't want to bother with any of them, except maybe the beer.
CO2 is the least of your concerns right now. RH should be a much higher concern. With high RH you will never get a usable bud, instead you get a mold/mould colony.
Florists
Member
Still 3+ weeks. Exchanging air is the easiest way. CO2 can be added by a burner, dry ice, brewing alcohol/beer/wine, or bottled CO2. You don't want to bother with any of them, except maybe the beer.
CO2 is the least of your concerns right now. RH should be a much higher concern. With high RH you will never get a usable bud, instead you get a mold/mould colony.
RELPHY82
Active Member
Not many leafs to be cutting there give her a chance
Florists
Member
I cuted just 2 leafs week ago, now hes growing good and fast
nomofatum
Well-Known Member
Looks much better. The color tells me it's ready for a bit more food though.
So, what did you actually do/change?
