Grow System 2400 Watt GHE DUTCH POT AERO SYSTEM

B

Bloomkraft90

New Member
Hi Guys,

im new in this forum but now its the first time i post something :)
I hope everything is understandable because my english is not the best.

I really need help from the community for my new Growroom.

My plan for my new system:

Growroom details

2.5 Meters Long x 2.0 Meters Wide x 2.5 Meters High / That is 12.5 cubic meter :)

Growsystem:

GHE Dutch Pot Aerodynamik 2m2 ( 2.2m Long / 1m Wide) Max. 120 Plants

Light:

4x Pro Gear electronic ballast Boxed 600 Watt
4x Adjust-A-Wings Avenger Medium 55cm Long x 58-72cm Wide
4x Philips SON-T Greenpower 600w
1x SMSCOM Switchbox All IN ONE Controller (4x600Watt + 2xFans)

Fans:

Exhaust Can Fan "S&P VENT 315l" 1890m3
Can Filter Spezial 315 (1770-2250m3/h)
Axial Air Fan 1300 m3
4x oscillating fans

-------------------------------------------------------------------------------------------------------

So. Puuuh :)

What you guys think oft these setup?
May you have some advices for me that would be great.

When a question is why so much light because of 1 Gramm per Watt :)


Please it would great to get a lot of comments and opinions


Thanks

Greetz :weed:
 
Last edited:
SnaFuu

SnaFuu

Well-Known Member
Not sure what all that means, but yeah buy it all and then just sit back and watch em grow while you count money rollin' in from your insane investment.

Good luck
 
B

Bloomkraft90

New Member
My question is what are you think about the setup?

Is the GHE Dutch Pot Aeros system worth it?
Is it enough airflow?
Is the SMSCOM Switchbox All IN ONE a good thing?

What you don't understand exactly?



Thanks
 
AKGrowAreo

AKGrowAreo

Well-Known Member
Bloomkraft90 said:
My question is what are you think about the setup?

Is the GHE Dutch Pot Aeros system worth it?
Is it enough airflow?
Is the SMSCOM Switchbox All IN ONE a good thing?

What you don't understand exactly?



Thanks
Click to expand...
Well, I am sure you will be okay with the above set up, but its not the route I would go personally.

I don't know what you paid for it, but I trust my DIY systems much more than any of the prebuilt ones. All the videos I've watched on the GHE Dutch Pot Aeros system looked to have super low pressure which will not give that much oxygen to the roots. I am sure you can grow some bomb in that system if you start with some good genetics, but you'd definitely do even better with a system that you build yourself. So if you have not already dropped the loot, look into a Do It Yoiurself style Aero system or Aero/NFT system like the @StinkBud method. Building yourself helps you grasp the concept much better and you can control the quality of the build not to mention maintaining the system will be way easier and cheaper.

Why are you going with 4 600s instead of 4 1000s? your already gonna need to add air conditioning with 4 600s so why not add the extra 1600 watts. If you have space for 4 600s you have space for 4 1000s. You need to keep you room temp below 78 w/out co2 or between 82 and 85 if you're running co2. You're gonna be way hotter than that unless you're bringing in cool outside air or runinning an AC unit. You're not gonna get 1gram per watt without the 1000s, or c02. You will be closer to .5 grams per watt with the set up you described above.

As for the SMSCOM Switchbox All IN ONE, no its not a good thing. You'd do way better with a Blueprint controller or even a Auto-Pilot, or Titan. If your just using it to run your lights then you really only need a cheap digital timer and an HID hub made from an HVAC contactor/relay which I can show you how to build if you don't want to buy one for a couple hundred.

One more thing, don't forget about humidity bro. If running co2 you'll need a dehumidifier or if you're not you'll need a humidity controller connected to an exhaust fan.

Just my 10 cents, hope that helps and let me know if you have any other q's. Good luck to you!
 
B

Bloomkraft90

New Member
At first thank you for this post :)

I only use the 600s and not the 1000s because of the electric bill. Im thinking to do additional with a friend he is electrician, diy led lights to get more yield.

But do you think its better to use the cooltube? Im little bit in worry with the heat.

Thanks a lot
 
AKGrowAreo

AKGrowAreo

Well-Known Member
Dont run High pressure unless you want 1000 headaches or if you are a NASA scientist. You wont get more than 5% higher yields and your quality is the same as LPA. at least 10 times the work, especially if you have no experience with HPA. HPA is super cool, but unnecessarily difficult.

LED is gonna be the shit.,..one day, but today your best bet is 1000w hps in a cool tube.

Honestly just go to my thread from the link and my signature and copy what I have done exactly and you will be very successful. I promise.
 
You must log in or register to reply here.
Top