VegasWinner
Well-Known Member
place the muffler closer to the fan and place the long duct after the muffler and your pressuure goes down on the exhaust side. passive intakes are fine. Is your tent sucked in or not. If your tent has not sucked in your fan is not pulling hard enough. When you get negative pressure, your temps will be under control. make sure your exhaust is above your lights and place the filter with the shortest duct as possible between the fan and the duct. Additional fans should not be needed for cooling if you have the exhaust dialed in. Fans are for circulation only not cooling. use a pc fan up where your light is to move air around and increase your inline fan and you should be fine. if you get a fan with speed controller you juts dial it up until you get the flow rate you want. That should solve your problems You need more flow due to the heat being exhausted by the light unit. peace