Bc blondes 800w cob

[Airwalker16]

What drivers does it use?

 

[BM9AGS]

i dont think the intake voltage would change anything significantly.

No. I remember some dude a year or so talking about the HZ rate being 1/5th less would have effect. For the guys on 50hz as opposed to 60hz. But whatever doubt I'd notice

 

[Growdict]

Mw 185 1400ma

 

[Growdict]

So you're gonna put your pots on the elevated wood? Isn't it a flood and drain??

That has to be a sog drain to waste setup

 

[Airwalker16]

Mw 185 1400ma

So 4 of them? 3 on one channel of 12 cobs and one on the other channel of 4 cobs?

 

[Growdict]

Yes

 

[pirg420]

Yes put the pots on the wood. Not flood n drain but spaghetti lines into each pot, or manual watering.

 

[pirg420]

3 gallon pots, coco, 23 day veg.

 

[pirg420]

3 gallon pots, coco, 23 day veg.

Sorry forgot to add, 9 plants per 4x4. I've done 16 with 2 gals but like this better.

 

[researching]

Idk if there really is any way to check them other than using some high tech equipment lol.i got a stack of cd bins here and this is the only markings they have other than the cree stamp on the opposite corner.
View attachment 3779988

Seems like all the newer chips have cree written in gold letters.
Sweet light though,cant wait to hear how it grows for ya.peace

I must not have looked at mine well enough... interesting

 

[PhotonFUD]

You guys plan on going the citizen route as an option?

 

[Airwalker16]

How's this light working out??

 

[Growdict]

it is much brighter than my LEC and allows me to use my entire tent 4x5ft. I have about one week left on my veg to fill in my scrog before i can flip it and get a run in. . I made some adjustments yesterday, they had the fans blowing down and out the sides, which was messing with my heat flowing up to extraction point. so i flipped all 8 fans and turned the middle cobs down to about 2/3rds brightness. i dont have a meter for that so just went by feel and look. I am very excited to see what it can do. i will post a pic in a little bit.

 

[Growdict]

I have 3 regs in there. Just starting to show preflowers. 2 female and i think the back right one is male.

 

[CobKits]

but cannot find number on cob itself.

there are none on crees. no marking of model number or bin

only real indication you have that the chips are recent (last 6 mos) are if the printing is gold lettering they are almost certainly CD bin. not that they cant be black letters and still be CD bin, but if they are gold its a good indication

 

[CobKits]

no shit! wish they had chimed in before to rep their company!

It's pretty cool that you can "dim" it by adjusting at the dial on the meanwell.......

standard "a" driver

 

[Airwalker16]

it is much brighter than my LEC and allows me to use my entire tent 4x5ft. I have about one week left on my veg to fill in my scrog before i can flip it and get a run in. . I made some adjustments yesterday, they had the fans blowing down and out the sides, which was messing with my heat flowing up to extraction point. so i flipped all 8 fans and turned the middle cobs down to about 2/3rds brightness. i dont have a meter for that so just went by feel and look. I am very excited to see what it can do. i will post a pic in a little bit.

Bro. Flip those fans back. The goal is to push air ONTO the heatsinks and out through the sides. You're gonna burn your cobs up. It's made that way for a reason. Why would you do that?

 

[Growdict]

wouldnt it work the same pulling the air past the heatsinks? i did that because it keeps my tent 4 degrees cooler

 

[Airwalker16]

wouldnt it work the same pulling the air past the heatsinks? i did that because it keeps my tent 4 degrees cooler

Absolutely not. Keeps your tent 4* cooler, and your cobs 20* hotter. For God's sake, switch them back.
@Rahz @Growmau5 @robincnn

 

[sixstring2112]

lol @ airtalker