The Dawg
Well-Known Member
I Use Digi-Key For My Beloved Vero AnglesHey TD,whats the best source for veros, Im looking for the 72v version 3000k 90cri of the new gen...
I Use Digi-Key For My Beloved Vero AnglesHey TD,whats the best source for veros, Im looking for the 72v version 3000k 90cri of the new gen...
Brother I Have Grown With A 70Cri Cob. It's My Party Cup Cob Which Is A 60 Watt 5000k 70 Cri CXB 3590. Now My Beloved Vero29 5000k Is An 80 Cri. Anyway Try It Out I'm Sure It Will Perform BeautifullyThis thread might change my mind on my future cobs... Maybe the 90cri are the better move... But what about a 3000 70cri?
Hey man this thread is fantastic, absolutely great, actually decided to go for a Citizen build as my first cob light thanks to youOk Peps here's A Sneak Peak Inside The Dawgs 4x4 Featuring The Dawgs Beloved Vero Angels. These Ladies Are Sisters Of The 1812 Grow
View attachment 3903939 View attachment 3903940 View attachment 3903941 View attachment 3903942 View attachment 3903943 View attachment 3903944 View attachment 3903945
Thanks man, i've been to cobkits/northengrowlights/rapidled a lot for the past week but none of them have a citizen in the 3500k 90cri range that isnt the CLU048-1212, i'm looking for either the CLU048-1812 or as you suggested the CLU048-1818, as far as i can tell running the 1818's with The 240-1050 just gets me better efficiency since i'm under driving them right?Welcome And Thank You For Your Kind Comments Brother Dreddd. If I Were You I'd Go With The CLUO48-1818-3500K 90 CRI And Run It The Same Way With The 240-1050. The Reason I Went with The 1812 Was That's What @robincnn https://northerngrowlights.com/collections/all Had In Stock. You Should Also Check Out https://cobkits.com/product-category/cob-chips/citizen/ Between These 2 They Should Be Able To Meet Your Citizen Needs
I see some 3000k 90cri 1818s out there that I wouldnt hesitate to use.Thanks man, i've been to cobkits/northengrowlights/rapidled a lot for the past week but none of them have a citizen in the 3500k 90cri range that isnt the CLU048-1212, i'm looking for either the CLU048-1812 or as you suggested the CLU048-1818, as far as i can tell running the 1818's with The 240-1050 just gets me better efficiency since i'm under driving them right?
Also you didnt say if the cobs in your builds are 5 gen or 6 gen, these two gens have a different spectrum.
Thanks again
i like the 3500k 90 CRI spectrum much more, if you look closely gen 5 and gen 6 dont actually have the same spectrum in general, gen 6 is a bit more green and blue with less red, gen 5 peak is at 630nm while gen 6 is at 620nm, not a huge deal i know, and if gen 5 or 6 were available in the 3500k 90cri flavor for 1812/1818 i'd jump on either.I see some 3000k 90cri 1818s out there that I wouldn't hesitate to use.
Exactly my thoughts! i mean isnt it easier to produce green and blue then red? of course the lm/W will increase if you produce less red and more blue/green..Interesting, maybe thats where their 3% lumen increase comes from, SNEAKY!
Perhaps less stretch will result with same amount of bud on shorter/stockier plants. Less trimming, denser bud than tall girls? Or tall girls are closer to light, so heavier? Or Tall girls block out the lower buds, greedily absorbing more photons than necessary, lowering the overall light absorption of the whole plant. Or...Like gaps on the tall girls and donkey dick on the short ones.The CLU058 3000k 90cri gen 6 looks great. Sitting next to a DE Gavita is still looks to have a lot less red and more than enough blue. The 4000k seemed to have to much blue and is not on par with the other half (3000k). You can see on the left the 4000k looks like it got left behind. The right side is 2 Gavitas
View attachment 3905836
Welcome Brother iIam If You Have Any Questions Don't Hesitate To AskI rather like the new spectrum
it's boosted noticeably at the 480 nm range, although it seems "narrower" it looks more full or complete
Great post you have here btw! thanks for your work, subbed!
Wanted to ask if you found a way around this problem? is this the reason why you went with the 1050mW drivers for two lights in this side by side thread?I Always Test My Lamps With A Kill A Watt Meter. Its A Cheap And Simple Way To Check The Actual Wattage And Amperage Of Your Light. When I Checked My 240 The Numbers Were Wonky And After Further Investigation I Found Out That My 240 Was Limiting My Current To 35.75V @1.3 Amps Light My Cob Up To 50 Watts Each Equaling 215 From The Wall. In Short What The Driver Was Doing Was Tapping The Brakes Slowing Down The Current