20 Ton Rosin

anyone have any issues using single controlled vs a dual controlled unit?
i'm looking at powers plates but they only have single controlled.
powers plates + low temp both stated that they do not notice a difference in quality or yield w/ single vs dual controlled plates.
 
oGeeFarms said:
anyone have any issues using single controlled vs a dual controlled unit?
i'm looking at powers plates but they only have single controlled.
powers plates + low temp both stated that they do not notice a difference in quality or yield w/ single vs dual controlled plates.
Click to expand...
i'm doing real good with single controller....
 
oGeeFarms said:
anyone have any issues using single controlled vs a dual controlled unit?
i'm looking at powers plates but they only have single controlled.
powers plates + low temp both stated that they do not notice a difference in quality or yield w/ single vs dual controlled plates.
Click to expand...
doublejj said:
i'm doing real good with single controller....
Click to expand...
I still want to upgrade to a dual controller. The having to touch the plates together for a minute every 3-4 squishes slows me down, but other than that, no problem.
 
Aeroknow said:
I still want to upgrade to a dual controller. The having to touch the plates together for a minute every 3-4 squishes slows me down, but other than that, no problem.
Click to expand...
o_O?....I have 2 heated plates controlled by one controller.....it keeps both plates hot
 
doublejj said:
o_O?....I have 2 heated plates controlled by one controller.....it keeps both plates hot
Click to expand...
Wut up brotha?

That top plate keeps getting hotter and hotter if I keep just squishing away. Slows me down a little touching the plates, but like i said no biggie. Squishing flowers. Squishing cons isn't as big of deal as the plates get super close every squish.
 
Aeroknow said:
Wut up brotha?

That top plate keeps getting hotter and hotter if I keep just squishing away. Slows me down a little touching the plates, but like i said no biggie. Squishing flowers. Squishing cons isn't as big of deal as the plates get super close every squish.
Click to expand...
cool.....I think because of the design of the HF press (there is a large hollow tube between the plates & the bottle jack) heating the jack is never an issue on mine...
 
doublejj said:
cool.....I think because of the design of the HF press (there is a large hollow tube between the plates & the bottle jack) heating the jack is never an issue on mine...
Click to expand...
Yeah, totally dude.

I can totally see that. The ram on my press, even though a piece of leather inbetween it and the top plate helps with the longevity of the ram, it just totally extracts heat different(less)than the bottom plate. plus heat rises so.

I might try and put the thermocouple on the top plate. I wonder if that could help my situation :confused:
 
Last edited:
Aeroknow said:
Yeah, totally dude.

I can totally see that. The ram on my press, even though a piece of leather inbetween it and the top plate helps with the longevity of the ram, it just totally extracts heat different(less)than the bottom plate. plus heat rises so.

I might try and put the thermocouple on the top plate. I wonder if that could help my situation :confused:
Click to expand...
yes it should
 
does everyone here just bubblehash their trim then press the bubble?
i tried a few times with pressing the trim directly and not having the best results.
 
Can someone in this thread give me a list of materials I need to start pressing?

I also need some advice on what press to get, what plates, thermocouples, etc.

Budget is under $1000 for everything.

Much appreciated!
 
^^^^ forgot to add to above: I am looking for a pneumatic press, I have an air compressor and tank.

Are any of these decent? Will all work with an air compressor/pneumatic system?

Sunned 5220AH
https://www.amazon.com/Sunex-5220AH...TF8&qid=1497068472&sr=8-1&keywords=sunex+5220

Press Right PR1720
https://www.amazon.com/TON-MANUAL-H...&qid=1497066853&sr=8-51&keywords=20+ton+press

Black Widow
http://www.discountramps.com/20-ton-shop-press/p/BD-PRESS-20A/

Will all of them work with low-temp plate/cage kits? https://www.lowtemp-plates.com/coll...ucts/4x7-lowtemp-cage-kit?variant=31540179218
 
Last edited:
You must log in or register to reply here.
Back
Top