DIY with Quantum Boards

[MonkeyPickAss]

a band saw is what machine shops use to cut stock metal

for thinner material you just use a finer blade

Bro, that's steel nobody is talking about steel here. You mark the heatsink and put it under the saw and pull down... how much easier could it get? You are left with a factory clean edge and it only took you 2 seconds to finish the cut. I cut hundreds of pieces of extruded aluminum every day, if there were an easier way to do it I would have figured it out by now.

 

[714steadyeddie]

What spectrum would work best for just flowering out a 4x2 tent ? I've been told 2700k or 4000k.

 

[ttystikk]

What spectrum would work best for just flowering out a 4x2 tent ? I've been told 2700k or 4000k.

2700 for bloom only. 4000 for both.

 

[Moflow]

 

[Moflow]

This gentleman could cut a record!

 

[714steadyeddie]

2700 for bloom only. 4000 for both.

Appreciate it boss. Can't wait to rock those bad boys

 

[Roger A. Shrubber]

ok, if it works i won't argue about it, but i'm pretty sure i'd have to go buy a blade, the old worn out wood blade probly won't do a good job

 

[MonkeyPickAss]

ok, if it works i won't argue about it, but i'm pretty sure i'd have to go buy a blade, the old worn out wood blade probly won't do a good job

You would be surprised. An older blade will work fine just go a bit slower. The blade on my saw at my station at work isn't fit to cut a 2x4 cleanly but it's still kicking cutting aluminum.

 

[grow1620]

hi. I just received my kit.
Just to be sure...on the AC side: white to blue and brown to black right?(green to green of course)...for 110 ac


nm, I found it. I was right.

*aw yeh. fired right up, working great.

 

[714steadyeddie]

hi. I just received my kit.
Just to be sure...on the AC side: white to blue and brown to black right?(green to green of course)...for 110 ac


nm, I found it. I was right.

*aw yeh. fired right up, working great.

Pictures mannn

 

[Stephenj37826]

A few shots of the HLG 550s coming along nicely.

 

[ttystikk]

View attachment 3944537 View attachment 3944538

A few shots of the HLG 550s coming along nicely.

Hubba hubba... I just got wood.

 

[SSGrower]

I did that on my tippy toes on the top of an eight foot ladder. Reaching up as far as I could to cut the rough end off of one of the screen room posts. The saw bound and I lost my balance for a quick second and then that same thought went through my head.

It has not killed me yet and I am almost done!

Safety fifth

Please be careful

 

[SSGrower]

Got a cat, want to skin it?
Harbor freight chop saw probably 2x expense of right blade for bandsaw, use the tool you got save the floor space for now, get a good proper tool if you want to make more than a few.

 

[MonkeyPickAss]

Got a cat, want to skin it?
Harbor freight chop saw probably 2x expense of right blade for bandsaw, use the tool you got save the floor space for now, get a good proper tool if you want to make more than a few.

Something tells me if you have a horizontal band saw you probably have a chop saw lol.

 

[grow1620]

mounted:



ladies under their new light



best part
born on 4/20!

This board replaced a cxb3590@~80w. The QB is dialed down to about 80w while I fine tune the distance to the plants.

*bonus pic:

 

[pop22]

I got a DeWalt chop saw at an auction for $35.00. Damn handy tool, even if I don't have need of it often.

Got a cat, want to skin it?
Harbor freight chop saw probably 2x expense of right blade for bandsaw, use the tool you got save the floor space for now, get a good proper tool if you want to make more than a few.

 

[dro-man80]

mounted:
View attachment 3944695


ladies under their new light
View attachment 3944697


best part
View attachment 3944698 born on 4/20!

This board replaced a cxb3590@~80w. The QB is dialed down to about 80w while I fine tune the distance to the plants.

*bonus pic:
View attachment 3944702

Love the pic of "Baby Groot AKA Weed Man holding the HLG Stickers lol...

 

[714steadyeddie]

been trying to talk to @robincnn all week about placing an order... One Pm a day is a little slow my dude.

 

[MonkeyPickAss]

been trying to talk to @robincnn all week about placing an order... One Pm a day is a little slow my dude.

So maybe order them like everybody else and stop thinking you are somehow more important than the 100 other people who want one.