robincnn
Well-Known Member
Next on the DIY menu.
boards boards boards
![upload_2016-11-5_19-16-45.png](/data/attachments/2923/2923517-ab9bca07f3597f68135645a605d7ca1a.jpg)
Thinking of getting some pre drilled heastinks for the boards. Will take a few weeks.
![upload_2016-11-5_19-26-53.png](/data/attachments/2923/2923522-c2ebe170217530b0ffb1b49ce8af3526.jpg)
Boards are about 174mm wide. This profile is about 200mm. Should be good for up to 80 watts.
Option 1:
1 board per heatsink. You can connect 2 or 3 or more of these heatsinks together using an Aluminum L channel. Heatsinks will be pre drilled but L channel will need drilling.
Option 2:
2 board per heatsink. No L channel aluminum required.
To connect 4 boards you can connect 2 of these heatsinks together using an Aluminum L channel.
Option 3:
3 board per heatsink. No L channel aluminum required.
What are these boards
https://www.rollitup.org/t/diy-passive-cooling-with-pin-heatsinks-sst120-and-sst140.906729/page-33#post-13100993
@Stephenj37826
boards boards boards
![upload_2016-11-5_19-16-45.png](/data/attachments/2923/2923517-ab9bca07f3597f68135645a605d7ca1a.jpg)
Thinking of getting some pre drilled heastinks for the boards. Will take a few weeks.
![upload_2016-11-5_19-26-53.png](/data/attachments/2923/2923522-c2ebe170217530b0ffb1b49ce8af3526.jpg)
Boards are about 174mm wide. This profile is about 200mm. Should be good for up to 80 watts.
Option 1:
1 board per heatsink. You can connect 2 or 3 or more of these heatsinks together using an Aluminum L channel. Heatsinks will be pre drilled but L channel will need drilling.
Option 2:
2 board per heatsink. No L channel aluminum required.
To connect 4 boards you can connect 2 of these heatsinks together using an Aluminum L channel.
Option 3:
3 board per heatsink. No L channel aluminum required.
What are these boards
https://www.rollitup.org/t/diy-passive-cooling-with-pin-heatsinks-sst120-and-sst140.906729/page-33#post-13100993
@Stephenj37826