Club Vert LED

What kind of LED do you use to grow vertically?


  • Total voters
    66

meetjoeblow

Well-Known Member
Hey guys I'm trying to design an air cooled vertical scrog with 4 -6 nets surrounding a single light and I wanted to incorporate supplemental led lighting but I can't think of a way to do so. Any thoughts.. Not well versed in Lee's btw but im not above research
 

ttystikk

Well-Known Member
Hey guys I'm trying to design an air cooled vertical scrog with 4 -6 nets surrounding a single light and I wanted to incorporate supplemental led lighting but I can't think of a way to do so. Any thoughts.. Not well versed in Lee's btw but im not above research
LED doesn't lend itself to round grows. The light is more directional so it works better with flat panels.
 

Nutria

Well-Known Member
Guys I would like to run some lm561c strips, drive eveything rly soft.
I grow in a 2x2, 2ft space from plants to leds, plant container is 8".
Do you think I would have enough space between plants and leds?
I will make a sog grow in 1/2gal.
 

ttystikk

Well-Known Member
Guys I would like to run some lm561c strips, drive eveything rly soft.
I grow in a 2x2, 2ft space from plants to leds, plant container is 8".
Do you think I would have enough space between plants and leds?
I will make a sog grow in 1/2gal.
Should be plenty.
 

Big Green Thumb

Well-Known Member
Just found this thread. I am strongly considering changing up my tent for the next grow from this:
20171111_094355.jpg

to a vertical grow. The above grow was in a 4x4 area that produced 1.6 pounds from 6 plants at a bit over 1000 watts of cheap led strips. My current grow is in a 5x5 with 700 watts overhead and 360 side/perimeter lighting. The plan is to do 2 opposing vertical walls in the 5x5 with 2 plants on each wall. The above 2' x 4' light panels will be hung to shine on the walls with 2 or 3 panels per wall. Each panel is capable of 360+ watts each so 4 of the 2x4 panels would be 720- ish watts shining on each wall for a total of 1440 watts, or I could do 6 panels for 1080 watts per wall. The power supplies are adjustable so I can dim them as much as I want. In theory there could be 2 walls of 5x5 greenery in there, effectively doubling my grow area. Whatcha think?


p.s. This is a link to the above picture's grow
https://www.rollitup.org/t/can-700-watts-of-led-strips-grow-trees.946736/page-7
 
Last edited:

Big Green Thumb

Well-Known Member
I'll start; I want to address the assumption that a vertical grow must be round in shape.

My own Super Silos were round, but only because of the nature of the HID light source. LED is generally much more directional, which renders the classic round or cylindrical shape unnecessary.

Therefore, I believe the new shape of vertical growing with LED lighting is flat panels. One immediate advantage is that flattening the panel reduces leaf shading substantially.

View attachment 3842329
Here, and I thought you were a dude all this time!
 

bruce786

Well-Known Member
Doing a vertical hydroponic sog with scrog net. Led lit with cxbs3590s. I have done a similar style before, with decent success but due to moving to a new place did not look after that grow too well and did not check the weight of the yield. It showed me that it was a viable system so i tweaked it slightly and it looks to be much easier to play with.

photo_2018-01-24_23-53-51.jpg photo_2018-01-24_23-53-45.jpg
 

ttystikk

Well-Known Member
Doing a vertical hydroponic sog with scrog net. Led lit with cxbs3590s. I have done a similar style before, with decent success but due to moving to a new place did not look after that grow too well and did not check the weight of the yield. It showed me that it was a viable system so i tweaked it slightly and it looks to be much easier to play with.

View attachment 4078990 View attachment 4078991
Me like! Frankly, your approach with lots of plants is likely to yield more than using big single plants like I have been doing.

You might want to find some way to hold your plants up as they grow. I use wire ties and vine clips and attach to the trellis.
 
Top