You're the fifth person who didn't get the joke.Hey Al,
I think I read in another thread that you were looking for birth control pills to feminize your seeds????
Still lookin'???
Plants don't sleep.Im not sure thats it not have`in the light on 24 hours a day with people & plants some growth only happens when we sleep
Hope that helped
What is your humidity level? Get that tested and you will know.Cools thanks.. I've been seeing alot of algae and slow growth. Can't get H202 over in the west now. Its banned. Cloest to H202 is dutchmaster ZONE.
Had a off topic question for AL. I'm 5 weeks into flowering and the big colas llok great. But im starting to see yellowing from the colas. Is that from the light too close or signs of beginning BUD ROT? I'm using 1000watt HPS to flower and i've seen it before from my previous grow.
At my previous grow it looked like light too close, but then when i harvest them and dried them, they were bud rot? Is it because the colas are too big? I have a 14inch exhaust fan (3500 cfm) and 4 fans circulating the air in a 12x14 room? Im doing drain to waste (RW mini cubes + clay pellet + 5gallon bucket) Should i put a dehumidfier?
Please shop around. I've heard the California peroxide ban rumour a few times now and was able to find 35% H2O2 on the shelf in 4 hydro shops in LA via their websites.Cools thanks.. I've been seeing alot of algae and slow growth. Can't get H202 over in the west now. Its banned. Cloest to H202 is dutchmaster ZONE.
Got pix?Had a off topic question for AL. I'm 5 weeks into flowering and the big colas llok great. But im starting to see yellowing from the colas. Is that from the light too close or signs of beginning BUD ROT? I'm using 1000watt HPS to flower and i've seen it before from my previous grow.
What does your peak-memory recording thermometer/hygrometer tell you about the extremes of temp & humidity?At my previous grow it looked like light too close, but then when i harvest them and dried them, they were bud rot? Is it because the colas are too big? I have a 14inch exhaust fan (3500 cfm) and 4 fans circulating the air in a 12x14 room? Im doing drain to waste (RW mini cubes + clay pellet + 5gallon bucket) Should i put a dehumidfier?
While I appreciate the compliment, I am not anybody's jesus and frankly, I stuff it up fairly often. I seriously cringe when folks say stuff like this.Jesus christ of pot growers AL B Fuct. Your the man
What's starter fert?i have aquick question fo ya. I have a micro DWC plants were started in starter fert
should be fine.and then moved into hydroton into 4" pots. I have 1.5 gal of waterin 3 galon bucket with a 12 inch air stone right under the cups. Water level is about .5" away from the cups should it be less?allowing more space between the water and cup to allow for more areo roots.
That's a fairly long thread, is there anything specific you need me to see? If so, kindly link me.My grow journal is in my sig. If you could drop by that would be kool.
You seriously need to replace the broken hygrometer. That's must-know (not guess) stuff. 67% isn't horrible but it could be lower. However, 67% is what it was the last time the hygro was working, you have no idea what it is now. At 70%, powdery mildew and botyritis (grey mould, bud rot) are almost a sure thing.I remember before i broke the sensors, 75 temp, 67 humidity. Al, you think its due to the 2 40 gallon garbage cans i have in there with premixed nutes?
I hope he means you 'won't need an intake fan' not 'you won't need an intake port through the room wall.' If it really shifts 3500CFM, you definitely won't need an intake fan! You of course DO need to have an intake path which is around 2x the dia of the exhaust blower to avoid throttling it. Every gozout needs a gozin. If the intake path is too restrictive, you won't get anywhere near the blower's CFM rating.Yeah, a buddy of mine got me that fan. Which costed ALOT. Hes said with this, you won't need an intake. I have 4 airkings circulating the room.
Some strains definitely are more mould resistant than others. Sweet Tooth #4 was developed from Sweet Tooth #3 because ST3 was very susceptible to bud rot. However, you should be able to put the brakes on it with a sulfur vapouriser.Do you think its the strain of the plant that i'm growing that budrots easily? It's CHEM-DAWG strain. Very nice strain, BIIIIIIGGGG colas and MOST THC i've ever seen. Only downside is the budrot. I wonder is it due to the colas being toooo DENSE.
wait, why both RW & pellets?I currently have them on 5gal buckets with half filled miniRW and hydrotons.
What's Gravity?IT's the 5th week, and i today i started adding GRAVITY to them. First time on gravity. Gonna see how they look 2m.
Gravity is a ripening additive from humbolt county. It's suppose to add alot more weigh into the yield. And I heard that it helps the plants finish a week earlier.While I appreciate the compliment, I am not anybody's jesus and frankly, I stuff it up fairly often. I seriously cringe when folks say stuff like this.
What's starter fert?
should be fine.
That's a fairly long thread, is there anything specific you need me to see? If so, kindly link me.
You seriously need to replace the broken hygrometer. That's must-know (not guess) stuff. 67% isn't horrible but it could be lower. However, 67% is what it was the last time the hygro was working, you have no idea what it is now. At 70%, powdery mildew and botyritis (grey mould, bud rot) are almost a sure thing.
How many plants are you running? 80gal is a hell of a lot of nutes. 5L per plant is usually sufficient in most applications.
Yes, there will be an appreciable amount of evaporation from any open nute tank. Covering the tank will keep evaporation from the tank down, but it can create a space under the lid and above the waterline with high humidity and no air motion, which won't be frequently rinsed with H2O2 dosed nute soln. Fungi will love a space like that.
There will be more evaporation from the media the plants are in ad through their leaves- and you can't cover the leaves!
I hope he means you 'won't need an intake fan' not 'you won't need an intake port through the room wall.' If it really shifts 3500CFM, you definitely won't need an intake fan! You of course DO need to have an intake path which is around 2x the dia of the exhaust blower to avoid throttling it. Every gozout needs a gozin. If the intake path is too restrictive, you won't get anywhere near the blower's CFM rating.
I do have a big intake port. Should be big enough for the outakes fan to suck out.
What's an airking?
An airking is a brand of oscalting fan which is pretty strong.
Some strains definitely are more mould resistant than others. Sweet Tooth #4 was developed from Sweet Tooth #3 because ST3 was very susceptible to bud rot. However, you should be able to put the brakes on it with a sulfur vapouriser.
I was reading on the sulfur vapouriser. How does it work? Do i plug it into something and it turns on 2x's a day or something?
wait, why both RW & pellets?
The pellets is to have the plants stay on the bottom so it wont tip over.
The RW is for the plants to grow their roots into.
What's Gravity?
While I appreciate the compliment, I am not anybody's jesus and frankly, I stuff it up fairly often. I seriously cringe when folks say stuff like this.
What's starter fert?
should be fine.
That's a fairly long thread, is there anything specific you need me to see? If so, kindly link me.
You seriously need to replace the broken hygrometer. That's must-know (not guess) stuff. 67% isn't horrible but it could be lower. However, 67% is what it was the last time the hygro was working, you have no idea what it is now. At 70%, powdery mildew and botyritis (grey mould, bud rot) are almost a sure thing.
How many plants are you running? 80gal is a hell of a lot of nutes. 5L per plant is usually sufficient in most applications.
Yes, there will be an appreciable amount of evaporation from any open nute tank. Covering the tank will keep evaporation from the tank down, but it can create a space under the lid and above the waterline with high humidity and no air motion, which won't be frequently rinsed with H2O2 dosed nute soln. Fungi will love a space like that.
There will be more evaporation from the media the plants are in ad through their leaves- and you can't cover the leaves!
I hope he means you 'won't need an intake fan' not 'you won't need an intake port through the room wall.' If it really shifts 3500CFM, you definitely won't need an intake fan! You of course DO need to have an intake path which is around 2x the dia of the exhaust blower to avoid throttling it. Every gozout needs a gozin. If the intake path is too restrictive, you won't get anywhere near the blower's CFM rating.
What's an airking?
Some strains definitely are more mould resistant than others. Sweet Tooth #4 was developed from Sweet Tooth #3 because ST3 was very susceptible to bud rot. However, you should be able to put the brakes on it with a sulfur vapouriser.
wait, why both RW & pellets?
What's Gravity?
Sounds like your ordinary average 'magic sauce.'Gravity is a ripening additive from humbolt county. It's suppose to add alot more weigh into the yield. And I heard that it helps the plants finish a week earlier.
dead link.Hey AL, here some pics
Looks like bud rot..
But it can be lights too close?
Marijuana Growing - 415medical's Albums