nc208
Well-Known Member
Was checking out their website and came across this new product they now have, looks like a nice upgrade from the 4-up board they offer.
This simple to use, plug and play two-channel photo and far red board is designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensity
The board comes with 12 x XP-E HE Photo Red and 6 x XP-E Far Red LEDs, 2 x Mean Well LDD-700LS drivers, a WAGO connector for dimming and a DC barrel connector for easy, solderless power
Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip
If you are using your own power supply you will need to supply between 28-36VDC constant voltage, and a minimum of 30W per board
LED Wattage :~30W
LEDs :Top Bin XP-E HE Photo Red And XP-E Far Red
Drivers : Mean Well LDD-700LS
Coverage Area :2' X 4'
Compatible Lens : Ledil Florence
DC Power Connector :5.5mm OD/2.5mm ID
Dimming Signal : Optional 2.5-6V PWM
Dimensions : 974mm X 47.5mm (~38.5" X 1.9")
Source
https://www.rapidled.com/emerson-effect-booster-board/
![](/proxy.php?image=https%3A%2F%2Fcdn7.bigcommerce.com%2Fs-f61b0%2Fimages%2Fstencil%2F1280x1280%2Fproducts%2F808%2F2724%2FEmersonEffectBoard1__46242.1518740053.jpg%3Fc%3D2%26imbypass%3Don%26imbypass%3Don&hash=d458645d2968f886b423765c8968987d)
This simple to use, plug and play two-channel photo and far red board is designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensity
The board comes with 12 x XP-E HE Photo Red and 6 x XP-E Far Red LEDs, 2 x Mean Well LDD-700LS drivers, a WAGO connector for dimming and a DC barrel connector for easy, solderless power
Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip
If you are using your own power supply you will need to supply between 28-36VDC constant voltage, and a minimum of 30W per board
LED Wattage :~30W
LEDs :Top Bin XP-E HE Photo Red And XP-E Far Red
Drivers : Mean Well LDD-700LS
Coverage Area :2' X 4'
Compatible Lens : Ledil Florence
DC Power Connector :5.5mm OD/2.5mm ID
Dimming Signal : Optional 2.5-6V PWM
Dimensions : 974mm X 47.5mm (~38.5" X 1.9")
Source
https://www.rapidled.com/emerson-effect-booster-board/