Help

[mytwhyt]

How do you have the waterfarms set up? Are they all connected? Do you have the controler reservoir and the feedback reservoir that goes with it? Are there any of the blue tubes with the white tape that indicates the water level anywhere on the containers, or reservoir? Does it have the so called circulation kit in the controler reservoir? Are your flowering plants in with the clones? Was it a bare root clone?

Here's the thread i recommend for all waterfarm users.. Although it's a single WF grow, it illustrates how to run a WF and get an excellent yield.. This thread will be a better way to learn.. You don't have to do the scrog screen to get a good yield from a WF.. I admit i am a Dick at least 1/2 the time.. Maybe this is being one, but i see it as promoting reading in place of spoon feeding... I'll be happy to help you over any bumps in the road to a successful grow..
https://www.rollitup.org/t/pineapple-express-g13-labs-seed-to-harvest.344359/

 

[Ethanb11290]

How do you have the waterfarms set up? Are they all connected? Do you have the controler reservoir and the feedback reservoir that goes with it? Are there any of the blue tubes with the white tape that indicates the water level anywhere on the containers, or reservoir? Does it have the so called circulation kit in the controler reservoir? Are your flowering plants in with the clones? Was it a bare root clone?

Here's the thread i recommend for all waterfarm users.. Although it's a single WF grow, it illustrates how to run a WF and get an excellent yield.. This thread will be a better way to learn.. You don't have to do the scrog screen to get a good yield from a WF.. I admit i am a Dick at least 1/2 the time.. Maybe this is being one, but i see it as promoting reading in place of spoon feeding... I'll be happy to help you over any bumps in the road to a successful grow..
https://www.rollitup.org/t/pineapple-express-g13-labs-seed-to-harvest.344359/

I have the older hydro farm where all the buckets are Ted off instead of run directly through. I think that problem 1. The other problem I had was I put some well water in there. So I took everything apart. Sterilized it and I’m gonna start it over. I have both reservoirs No circulation kit I think because it’s an older model but they do sell the upgrade kit with the pump which I will buy. All I have is the 4 valve air pump with controls 8 buckets. The only place the blue tube is, is on the bottom reservoir. So yes this model is different than the ones I see. So I assume it’s an older one

 

[Ethanb11290]

I have the older hydro farm where all the buckets are Ted off instead of run directly through. I think that problem 1. The other problem I had was I put some well water in there. So I took everything apart. Sterilized it and I’m gonna start it over. I have both reservoirs No circulation kit I think because it’s an older model but they do sell the upgrade kit with the pump which I will buy. All I have is the 4 valve air pump with controls 8 buckets. The only place the blue tube is, is on the bottom reservoir. So yes this model is different than the ones I see. So I assume it’s an older one

My flowering plants are in a seperate tent by themselves. I built a small cabinet for my cloning machine just for that. I also have the 4x4 tent for the hydro system and 1000 watt. Which is where the clones will go

 

[DonTesla]

go organic bro! I'll help you!

 

[GoatSoup]

Get a ppm meter, even a cheap one. Check every day and calibrate once a week.

 

[Viva México]

Yes, a EC or ppm meter is just as important specially if having problems. If you had one you could check to see how clean your washed gravel is before using it. Also are you using H2O2. This is a must when using recycled gravel.

 

[mytwhyt]

I once ran low on hydroton in a unconnected 4 wf grow.. I used a 50/50 mix of washed pea gravel as filler in one bucket.. I didn't take in to consideration the fact that the pea gravel was mostly 50% limestone. The ph in that bucket always needed to be adjusted down..