4 32 site xl undercurrent systems in a 20X40 room

thenugget

thenugget

Well-Known Member
Got any new pics to show us man? Only way you won't be harvesting those plants man is if you rolled for them because you have that setup dialed! Very impressive I'm sure your father in law would be proud all those dollars he put up has resulted in many many more dollars for his daughter and yourself. Props man you proved all the skeptics wrong and now they aren't anywhere to be seen? Haha
 
bdt1981

bdt1981

Well-Known Member
thenugget said:
Got any new pics to show us man? Only way you won't be harvesting those plants man is if you rolled for them because you have that setup dialed! Very impressive I'm sure your father in law would be proud all those dollars he put up has resulted in many many more dollars for his daughter and yourself. Props man you proved all the skeptics wrong and now they aren't anywhere to be seen? Haha
Click to expand...
That is sure right. Lol. Havent saw a single 1 since i put plants in the buckets. New pix will be coming here in an hour or so. Bout to go to my shop. I been snapping a few but ill get some good ones here in a few.
 
bdt1981

bdt1981

Well-Known Member
thenugget said:
Got any new pics to show us man? Only way you won't be harvesting those plants man is if you rolled for them because you have that setup dialed! Very impressive I'm sure your father in law would be proud all those dollars he put up has resulted in many many more dollars for his daughter and yourself. Props man you proved all the skeptics wrong and now they aren't anywhere to be seen? Haha
Click to expand...
her a few pix
 

Attachments

bdt1981

bdt1981

Well-Known Member
So i found a few nanners on the glue plants. Im pretty sure i have it narrowed down to 2 causes. Either the stress it recieved when i took the cuts. I just hacked a bushel of beanches and taped together and they all sat in a 5 gal bucket for 2 days with water in bottom. Took final cut and put on clone machine. Other cause is the ideal air control panel that i thought was also the thermostat i hung directly in middle of canopy. It has white light thats pretty bright. Glue is the only one that threw nanners. So any seed i find is going to be crossed with the largest plant in my grow. Sadly im culling the glue from my roster.
It is still a sucess to me because this was a test run for this exact reason. Im tempted to bring the slh back and run a full system of them cuz the weed is fire. My favorite is going to be the lost cause that there is only one of. I bet that one bucket gets over a pound. Definatly keeping it and want to run a full system of it. The gold leaf is crazy fire looking shit. The lost cause has thick colas dense as hell lots of them. Sweet bud
 
Aeroknow

Aeroknow

Well-Known Member
bdt1981 said:
So i found a few nanners on the glue plants. Im pretty sure i have it narrowed down to 2 causes. Either the stress it recieved when i took the cuts. I just hacked a bushel of beanches and taped together and they all sat in a 5 gal bucket for 2 days with water in bottom. Took final cut and put on clone machine. Other cause is the ideal air control panel that i thought was also the thermostat i hung directly in middle of canopy. It has white light thats pretty bright. Glue is the only one that threw nanners. So any seed i find is going to be crossed with the largest plant in my grow. Sadly im culling the glue from my roster.
It is still a sucess to me because this was a test run for this exact reason. Im tempted to bring the slh back and run a full system of them cuz the weed is fire. My favorite is going to be the lost cause that there is only one of. I bet that one bucket gets over a pound. Definatly keeping it and want to run a full system of it. The gold leaf is crazy fire looking shit. The lost cause has thick colas dense as hell lots of them. Sweet bud
Click to expand...
Yeah, most likely it was the light from the controler is probably what made the glue throw some nuts. Had that happen quite a few times with that cut from too many green led’s on electronics within the growrooms. Couldn’t figure it out. Only the glue would be the one growing a couple nuts here and there. Enough to lightly seed.
Covered all the green led’s on electronics, problem went away.


Green led’s aren’t supposed to fuck with flowering, that’s what i always used to say.
 
bdt1981

bdt1981

Well-Known Member
Aeroknow said:
Yeah, most likely it was the light from the controler is probably what made the glue throw some nuts. Had that happen quite a few times with that cut from too many green led’s on electronics within the growrooms. Couldn’t figure it out. Only the glue would be the one growing a couple nuts here and there. Enough to lightly seed.
Covered all the green led’s on electronics, problem went away.


Green led’s aren’t supposed to fuck with flowering, that’s what i always used to say.
Click to expand...
Really. Yea i have a ph controller and a guardian monitor then the control panel. Prob why they give 30' of wire with it so u can run it outside the growroom.
 
bdt1981

bdt1981

Well-Known Member
Anyone know what it would cost to have someone come in and tell you everything to get set up the equipment then show thèm how to use it and consult afterward? Or what someone would charge to do all that?
 
thenasty1

thenasty1

Well-Known Member
bdt1981 said:
Anyone know what it would cost to have someone come in and tell you everything to get set up the equipment then show thèm how to use it and consult afterward? Or what someone would charge to do all that?
Click to expand...
depends on the size of the operation. build+start->finish consulting can get pretty pricey for large scale facilities
 
bdt1981

bdt1981

Well-Known Member
thenasty1 said:
depends on the size of the operation. build+start->finish consulting can get pretty pricey for large scale facilities
Click to expand...
Well to start a guy want s me to set up 3 wr site xxl uc systems and i suggest 24 1000watt de and 18 free hanging vertical 600 watt lights.
He just bought 20 32 site 13gal systems used with 1.5 hp chiller each for 1600 each
 
bdt1981

bdt1981

Well-Known Member
The 12 seeds i dropped all sprouted then one nl x skunk just wilted away one morning. But the others are doing great. So ready for this run to be over. I want to start 3 if i can fit it in there. No sense bsing around. I need to be running fullblast. Watch me hit near 32 lbs on one system with lost cause. Very anxious to see what that one bucket pulls.
 
bdt1981

bdt1981

Well-Known Member
11 hrs i spent harvesting. Gold leaf got stunted by ph dropping suddenly in the final 2 weeks. Now i know what caused that drop. The 10 glue plants came in heavy. Also had bucket completely full of root. Restricting flow. Glad to be done with that. The lost cause came in nice. The stunted slh has some fire bud. Might try it again at lower ppm. The gold leaf has fire weed but the plant grew sativa like in the uc. Balls of bud. Lots of them. Ill for sure hit 2 # per light. The gold leaf and slh hurt overall yield. I do think 4# per light is a sure thing with lost cause or glue filling a system. Like im almost certian it will. If not then more than 3/4# per bucket. Couple pix i snapped
 

Attachments

bdt1981

bdt1981

Well-Known Member
I have a question. Can the uc increase thc production? I only ask because when i hit my slh it blows me back hard like almost to much. But when i smoke it of my buddy where i got the clone from it just dont hit hard. His is fluffy where mine is more dense. Mine different green like lighter than his. Im not being bias cuz i grew it it just seems like all around better bud.
 
bdt1981

bdt1981

Well-Known Member
So the lost cause pulled about 370gs of prime bud and about 30 that were pretty airy from being completely covered by rest of plant. No weight on the gorilla glue yet. The ph drop that happened about 2.5 weeks from harvest is to blame for minimal growth the last 2 weeks. It shocked them good.
I know how to fix the ph issue. Watch the roots. Root prune more. Big plants like the glue need 2 week veg. The bucket being so full was a major contributor to the water not Recirculating the way it should. Cant wait to get these systems filled up again. By the end of the week should be on and crackin.
 
bdt1981

bdt1981

Well-Known Member
So I made my 3rd system into an xl with only 2 rows to leave myself room to work. So here it is a 76 site rdwc legal commercial grow 2 days in. Have a full system of blue dream then another system with blue dream and lost cause then a system with blue dream and gold leaf. They are responding pretty well. I was questioning whether the 1.5 hp chiller could cool all 3 systems. It was working for 2 full systems. I added 12 site system tonight so we shall see. Removing the ceiling tiles in the chiller room did wonders for the chiller. I'm very excited about this run. I know a few things to watch for this time so should be fun. Debating on 2 or 3 week veg. Here couple pic. Crazy how as small they are going in how fast they grow.
 

Attachments

You must log in or register to reply here.
Top