⚠︎ Brother OneHitDone Gone VERTICAL ⇪

diggs99

Well-Known Member
Yes, it is a channel that would normally be set up for nft but I just made some "Stops" for then ends of the channel (drainage holes on the downhill side obviously) and fill the channel with straight perlite.
It is fed by a single line on the uphill side of the channel. Waters twice a day to runoff.
The system is performing flawlessly and eliminates the water culture root system disease woes.

You can see the nutrient feed line on the left end of the channel in this pic
View attachment 4445579
I like it, slick

Thanks for explaining
 

hybridway2

Amare Shill
I like it, slick

Thanks for explaining
Right! He's the only grower i see running nft. I gotta give you some serious credit OHD.
You've eliminated the unneeded nutes that when laying around can be dangerous to a well planned feeding schedule. Especially when i personally am stoned AF n see over a $G worth of worthless to me nutes laying around to complicate matters.
Got the NFT working Perfectly & still make time to run tests & help my ass. Haha!
Good man this OHD is.
Having a real hard time following through with the tossing of the nutes.
Once i know what's what i will.
The GH vs Jacks Veg run using your recommended recipe for GH is going well. So well in fact that its going to be nearly impossible to choose.
Will be posting updates on that soon. Guess the decision will come down to the roots, n we'll know this wk during transplant.
Thanks brother OHD for the help in battling my LedDefficiency too.
Hoping that FB is a hit for you. Perfect for that NFT design as its a super stretcher & may even need x3 netts. Will produce nice spear shaped tops with chunky nugs all the way down. Some branches Cola up pretty well too. Interseted to see how she does under the HPS.
Good job!
 

gr865

Well-Known Member
Brother OneHitDone just checking in over here in the Vert Section and saying what's up to all the growers over here.
Still growing over here and have been surfing through some system revisions and finally feel that I'm rounding the corner to where I want my systems to be.
What I have finally come up with is an NFT system that has the channels filled with perlite and set up to drain to waste. After having a few unexplainable bouts of root issues in water culture I have decided to shelf that method for the time being.
Syterm is dialed so I can load 16 clones into 4 channels in veg and then just move them over to either 5x5 when I feel they are ready.
I have also incorporated some Vertical growing into both my veg and flower boxes. In veg I'm using wall systems for growing lettuce and other edible crops and in flower I'm using a wall system for producing my CBD varieties without getting in the way of main production.
Here's a few shots to catch up.

Veg Wall System:

View attachment 4439979View attachment 4439980

Flower Box setup:

View attachment 4439982View attachment 4439981

A little Blood Diamond OG getting close to flush time:

View attachment 4439983

Wall CBD Production:

View attachment 4439976

Channel is easily removable for training:

View attachment 4439977

Clones taking root for next round:

View attachment 4439978
Very clean setup there OHD!
 

ToneOZ

Well-Known Member
Oh yeah- they're the way, all right.

Ignoring the manufacturer's recommendations about lamp mounting and orientation invites spectrum shift and early lamp failure.
Moat hids are mouted vertically in a factory type workplace setting. Cant honestly say ive ever seen mainteneance change a bulb tho im sure they do.
 

hybridway2

Amare Shill
Batch of Cherry Pie got moved from veg to flower tonight....

View attachment 4451390

View attachment 4451391


Shot of the Green Crack almost rounding out week 5

View attachment 4451392
Your GC looks like a good One.
That strain was a big hit out here some yrs back. Good to see someone running it, have not since back then.
Very nice NFT (NoFuckinProblems) bro.!
Is that Wall Letti i see above?
I remember back when i first started growing, Saying to my buddy how one could flower just about anywhere that orange light hit in the room & almost got crazy with Wall mounting but didn't. This was back when i made a huge mistake on my count n paid dearly for it.
Anyhoot, awesome to see you utilizing that often overlooked space.
Freakin Cherry Pie looks like a banger too.
Man, w/o good genetics its like pissing against the wind. My fist yr in my current room was all random, scrappy, crappy genetics. Did not know what i know now about Pheno-Hunting, S-1's, yadda, yadda.
So important.
Gotta find you a nice SweetBlackAngel or maybe that GC can replace it if it has similar Traits?
 

OneHitDone

Well-Known Member
Your GC looks like a good One.
That strain was a big hit out here some yrs back. Good to see someone running it, have not since back then.
Very nice NFT (NoFuckinProblems) bro.!
Is that Wall Letti i see above?
I remember back when i first started growing, Saying to my buddy how one could flower just about anywhere that orange light hit in the room & almost got crazy with Wall mounting but didn't. This was back when i made a huge mistake on my count n paid dearly for it.
Anyhoot, awesome to see you utilizing that often overlooked space.
Freakin Cherry Pie looks like a banger too.
Man, w/o good genetics its like pissing against the wind. My fist yr in my current room was all random, scrappy, crappy genetics. Did not know what i know now about Pheno-Hunting, S-1's, yadda, yadda.
So important.
Gotta find you a nice SweetBlackAngel or maybe that GC can replace it if it has similar Traits?
Yep, lettuce and Kale chilling above the cannabis. Best tasting / freshest greens in town!
This GC has a very nice sweet hazy note. Similar to what the SBA was. Just gotta see if the nug structure stacks up on a full run, then I will know if she stays or if she goes.
 

OneHitDone

Well-Known Member
So here we go with another wacky OneHitDone creation.
Me and the standard Aerocloners just can't seem to get along so I got to brain storming.
Inspire by the GH RainForest - I Bring to you the OneHit Cool Mist Cloner!
Modded a Vicks Cool Mist humidifier as a sprayer / mister for a cloner. This should remedy the water temp issues I keep having with standard submersible pump / sprayer cloners.
I'll keep this updated as to if it actually works.

IMG_5771.jpgIMG_5773.jpgIMG_5772.jpgIMG_5774.jpgIMG_5775.jpgIMG_5779.jpgIMG_5782.jpgIMG_5783.jpg
 

2com

Well-Known Member
@OneHitDone Hey, can you tell me about that water pump mounted to the wall. Is that one of those "RV" pumps, like this https://www.amazon.com/Diaphragm-Priming-Gallons-Marine-Demand/dp/B00P8BE6S8/ref=sr_1_7?keywords=rv+pump&qid=1578942502&sr=8-7?

What's it's job? I was thinking (based off seeing it in another's thread) of using one for top feed, with 1/4" tubing and manifolds (like orbit, floraflex, etc.)

I figure these might be better suited for that purpose, higher psi, lower flow (for keeping rockwool or coco the perfect moisture and even drain to waste).

I like how you made that cloner lid with two layers so pucks could be recessed. Is the foam glued together?

Thanks.
 

OneHitDone

Well-Known Member
@OneHitDone Hey, can you tell me about that water pump mounted to the wall. Is that one of those "RV" pumps, like this https://www.amazon.com/Diaphragm-Priming-Gallons-Marine-Demand/dp/B00P8BE6S8/ref=sr_1_7?keywords=rv+pump&qid=1578942502&sr=8-7?

What's it's job? I was thinking (based off seeing it in another's thread) of using one for top feed, with 1/4" tubing and manifolds (like orbit, floraflex, etc.)

I figure these might be better suited for that purpose, higher psi, lower flow (for keeping rockwool or coco the perfect moisture and even drain to waste).

I like how you made that cloner lid with two layers so pucks could be recessed. Is the foam glued together?

Thanks.
Yes it is similar to that pump. I like that one with the threaded fittings better than the ones I have with barbs but these were dirt cheap on amazon. You can see the 12V power supple right next to it.
Currently it is going to be used for pumping the water out of the clone reservoir.

I did use the same pump for a tip drip system and it worked very well - just be ready for the noise if the pump you choose sounds like this one. You can see what I had set up here:
#532

The layers of foam have a couple dabs of hot glue between them but also the 4 screws are going through both layers and into an 1/4" ABS plastic plate that is on the bottom of the foam for the motor assembly to sit on :peace:
 

2com

Well-Known Member
You can see the 12V power supple right next to it.
In the post you linked? I don't see it. But just a 12v power supply (probably one in a box from an old device, haha), right?
EDIT: I see it.
I did use the same pump for a tip drip system and it worked very well - just be ready for the noise if the pump you choose sounds like this one. You can see what I had set up here:
#532
Cool. Year, loud hey. My other concern is the pressure. I guess some type of pressure regulator is needed to bring down to a manageable psi, such as? Haha. I think the 5gph pumps like this run about 135-150psi? Haha.
The layers of foam have a couple dabs of hot glue between them but also the 4 screws are going through both layers and into an 1/4" ABS plastic plate that is on the bottom of the foam for the motor assembly to sit on :peace:
Nice, doubt I could find some nice abs like that, but maybe could find something to replace. Nice one man.
 
Last edited:

2com

Well-Known Member
I just realized, yes @gr865 is the guy I first came across that style of pump being used. Didn't realize was same guy. I need to figure out what's needed for about 18-20 plants, as far as pump (psi, volume) to run enough manifolds/drippers for them. I was thinking 2 lines per plant (redundancy) with 8 port manifolds.
 

OneHitDone

Well-Known Member
I just realized, yes @gr865 is the guy I first came across that style of pump being used. Didn't realize was same guy. I need to figure out what's needed for about 18-20 plants, as far as pump (psi, volume) to run enough manifolds/drippers for them. I was thinking 2 lines per plant (redundancy) with 8 port manifolds.
Pretty simply to figure out - the pump you linked is 3 gallons a minute x 60 minutes = 180 Gallons per hour

An emitter like this is 13gallon an hour wide open (which you would not do) so 180 / 13 = 13.84 emitters

If your running hardware store type irrigation just use one of the inline pressure regulators or the filter / regulator combo as I posted above.
Works like a charm and the distribution is very even
 
Top